Laguna Dust Collectors
Laguna’s Flux series covers dust collection from portable canister units to industrial cyclone systems rated at 5,000 CFM. The lineup spans single-stage canister models (C|Flux), HEPA canister versions (P|Flux), two-stage cyclones (D|Flux), larger production cyclones (T|Flux and X|Flux), and industrial-grade systems (I|Flux) that meet NFPA 664 requirements. An ambient air filter (A|Flux) and fume extractor (E|Flux) round out the lineup for complete shop air quality control.
-
The T|Flux series from Laguna starts to get serious. The Tit...$6,999.00 -
Wet dust collector built for metalworking, drawing 3,103 CFM...$9,499.00 -
The T|Flux series from Laguna starts to get serious. The Tit...$10,499.00 -
Production Level Cleaning The iFlux|5 Elite uses an appropr...$11,999.00
-
The I|Flux:10 Elite has solved this issue by using an approp...$16,299.00
-
Machines like fiber cutters, plasma cutters, and CO2 laser m...$25,999.00
-
The A|Flux: 12 is designed to recycle all of the air in a 20...$599.00
Showing 13–19 of 19 results
Navigating the Laguna Flux Lineup
The letter before “|Flux” indicates the series. Each targets a different shop scale and filtration need.
The B|Flux is the entry point at 550 CFM shop setting with a 1-micron canister. The C|Flux series (three models at 1.5HP, 2HP, and 3HP) runs 900 to 1,624 CFM at shop setting with a 1-micron cartridge. The P|Flux series matches the same motor range but swaps in a HEPA cartridge with a PTFE membrane for finer particle capture.
The D|Flux adds a two-stage cyclone separator. Most chips and heavy dust drop into the drum in the first stage; finer particles continue to the canister filter. A wireless remote, magnetic hose connections, and air-strut drum lids are standard. The X|Flux 5 steps up to 5HP with 1,823 CFM at shop setting, an 8-inch inlet, and a 39-gallon drum with automatic canister cleaning every three minutes.
The T|Flux 10 delivers 4,030 CFM at shop setting. Smart drums alert when they reach capacity; automatic canister cleaning runs on a timed cycle. The I|Flux 10 Elite is the industrial option: 5,000 CFM, 409 square feet of filter surface area, PTFE filters, and NFPA 664 compliance for facilities with formal dust management programs.
The A|Flux 12 is an ambient air filtration unit that filters room air through a two-stage filter at up to 1,200 CFM. It supplements primary dust collection rather than replacing it. The E|Flux 7 is a fume extractor for finishing and chemical fume applications, not wood dust collection.
Frequently Asked Questions
What dust collectors does Laguna make?
Laguna makes the Flux series spanning the B|Flux (550 CFM canister), C|Flux and P|Flux canister machines (1.5HP to 3HP), the D|Flux two-stage cyclones, the X|Flux 5 and T|Flux production cyclones, and the I|Flux Elite industrial systems. An ambient air filter (A|Flux) and fume extractor (E|Flux) are also in the lineup.
What is the difference between the Laguna C|Flux and P|Flux dust collectors?
The C|Flux and P|Flux share the same motor sizes and airflow ratings (900 to 1,624 CFM at shop setting across three models). The difference is the filter: C|Flux uses a 1-micron standard cartridge; P|Flux uses a HEPA-rated cartridge with a PTFE membrane for finer particle capture and longer filter life.
Where can I buy a Laguna dust collector?
360 Degree Machinery is an authorized Laguna Tools distributor. Contact us for sizing guidance and current pricing on the full Laguna Flux dust collector lineup.