Ritter R131 Triple Spindle Horizontal Borer (1″ Centers)
Ritter R131 Triple Spindle Horizontal Borer (1″ Centers)
$7,490.00
A three spindle horizontal borer spaced on 1 inch centers, drilling three holes per foot pedal cycle instead of one. Built for shops working to imperial dimensions on dowel joinery and stile and rail assemblies. Runs on standard 110V single phase.
Specs & Features
Ritter R131 Triple Spindle Horizontal Borer (1″ Centers)
The R131 puts three gear driven spindles on a single head spaced one inch apart, so a foot pedal cycle that used to produce one hole now produces three. On repeat work such as dowel joinery or stile and rail assembly, that is one third the cycles for the same number of holes.
The spacing is the point. One inch centers suit shops dimensioning in inches and drilling to imperial hardware and dowel layouts. If your cabinet work is built on the European 32mm System instead, the R132 is the same platform on 32mm centers and is the one you want.
Three Holes per Cycle
The head is gear driven rather than belt driven at this size, and ships with three collets already configured for the direction each spindle turns, two left hand and one right hand. Bits are not included, so specify them with the order.
Pneumatic Clamping and a Foot Pedal Cycle
A pneumatic cylinder clamps the workpiece flat to the table before the spindles advance, which keeps the part from shifting and keeps hands away from the bits. The cycle is foot actuated, so both hands stay on the work. Four material positioning stops make a setup repeatable across a run.
Sized for a Standard Shop Circuit
Boring depth adjusts from 0 to 2 inches. The machine wires for 110V single phase, so it does not need three phase power and can be placed wherever there is a standard circuit and an air line.
Specifications
| Spindles | (1) triple spindle gear driven head |
|---|---|
| Spindle centers | 1 in |
| Collets | 7/16-14 female threaded, (2) left hand, (1) right hand |
| Spindle drive motor | 3/4 HP, TEFC |
| Boring depth | 0 to 2 in, adjustable |
| Work table area | 8 in x 20 in |
| Material positioning stops | (4) |
| Clamping cylinder | 3.00 in bore |
| Motor controls | Manual |
| Cycle actuation | Foot pedal |
| Electrical | 110V, single phase, 60 Hz |
| Tooling | Not included |
| Origin | Designed and manufactured in the USA |
Contact 360 Degree Machinery
360 Degree Machinery is an authorized Ritter distributor. Call 630-229-6705 or request a quote online. If you are deciding between 1 inch and 32mm spindle centers, tell us what hardware you build to and we will point you to the right one.
Shipping
FREE SHIPPING DOES NOT APPLY TO PRE-OWNED MACHINERY
Please Contact us for a shipping quote for Pre-Owned Machinery and or New machinery below $6,000.
***Some restrictions apply for free freight on NEW machinery over $5,999. FREE freight is to a commercial address with a dock and or forklift. EXTRA FEES may apply to accessorials like restricted access, residential drops, liftgates, and excessive lengths.
Applies to lower 36 of the contiguous states only. AZ, CA, CO, ID, MT, ND, NV, OR, SD, UT, WA, & WY do not qualify for free shipping. We can split ship to these states from $5,999 and up. Free shipping does not apply to RazorGage, Oliver, nor JLT Machinery or other machines listed as not free shipping.
Manuals & Technical Documents
360 Degree Machinery offers financing solutions with competitive rates, flexible terms, and a simple application. Take the hassle out of machinery purchases. Click Here to learn more now!
Related products
-
The starting point for our line boring machines, this unit i...$7,390.00This product is already in your quote request list.
-
32mm Spindle Centers 10mm Bored Collets (24) Right Han...$28,390.00This product is already in your quote request list.
-
0″-24″ Programmable Trhoat Capacity Triple Precision Dril...$102,290.00This product is already in your quote request list.
