Laguna Wood Pro 51″ Wide Belt Sander
Laguna Wood Pro 51″ Wide Belt Sander
$49,499.00
This machine is equipped with 1 combination head. This means you can sand either using the drum or the sanding platen or both at the same time. Due to the large HP motor (20 HP) the machine is capable of dimensioning even wide boards. This is important for customers who do not own a thickness planer. When you use the machine to dimension your work only very aggressive paper 60 or 80 grit should be used. The heavy carpet feed belt is powered by a separate 1HP motor and has a variable speed conveyor of 12-60 FPM.
- Single Head
- Main Motor: 20HP 3 Phase
- Variable Feed Motor : 1HP
- Table Lifting Motor: 0.25HP
- Capacity: 37″
- Belt Length: 75″
Specs & Features
This machine is equipped with 1 ( 8”) roller and a second (4”) roller followed by a wide platen for fine finish. This allows you to use a rougher grit on first roller (8”) that will absorb most of the impact and do the dimensioning while the second roller (4”) with the Platen can have a finer grit. This will save time over having to run your production through the machine 2 times & change belt grit. Due to the large HP motor (30 HP) the machine is capable of dimensioning even wide boards. This is important for customers who do not own a thickness planer. When you use the machine to dimension your work only very aggressive paper 60 or 80 grit should be used.The heavy carpet feed belt is powered by a separate 2HP motor and the feed speed is adjustable from 12 to 60 fpm.
You can adjust the thickness in 4 ways:
- Manual hand-wheel on the bottom of the machine
- By pressing the up or down arrow the table will move in desired direction
- Input a set dimension on the key pad and machine will go to that dimension
- The auto thickness gauge will measure your wood piece and automatically set the table to the thickness of the piece of wood inserted
Max Sanding Height: 5.9″ (150mm)
Min Sanding Height: ¼” (6.4mm)
Max Sanding Width: 51″ (1300mm)
Sanding Belt Size: 51″ x 75″ (940mm x 1905mm)
Adjustable Sanding Platen: 1¾” (45mm)
Diameter: of Sanding Head: 8″ + 4″
Length of Sanding Head: 51″
Sanding Head RPM: 1725
Variable Conveyor Speed: 12 – 60 fpm
Dust Port Size: 5″ (127mm)
Number of Dust Ports: 8
Footprint (L x W x H): 63″ x 65″ x 98″
Conveyor Height At Lowest Setting: 32″ (813mm)
Cabinet: Steel
Operating Air Pressure: 6 Bar
Sanding Belt Oscillation: Pneumatic/Adjustable
Sanding Belt Motor Brake: Yes. Air Operated Disc Brake
CSA: Fully Certified
Net Weight: 4200 lbs
Ship Weight: 4450 lbs
Shipping
FREE SHIPPING DOES NOT APPLY TO PRE-OWNED MACHINERY
Please Contact us for a shipping quote for Pre-Owned Machinery and or New machinery below $6,000.
***Some restrictions apply for free freight on NEW machinery over $5,999. FREE freight is to a commercial address with a dock and or forklift. EXTRA FEES may apply to accessorials like restricted access, residential drops, liftgates, and excessive lengths.
Applies to lower 36 of the contiguous states only. AZ, CA, CO, ID, MT, ND, NV, OR, SD, UT, WA, & WY do not qualify for free shipping. We can split ship to these states from $5,999 and up. Free shipping does not apply to RazorGage, Oliver, nor JLT Machinery or other machines listed as not free shipping.
Manuals & Technical Documents
360 Degree Machinery offers financing solutions with competitive rates, flexible terms, and a simple application. Take the hassle out of machinery purchases. Click Here to learn more now!
Related products
-
This machine features 9" X 48" platens and is powered by a 7...This product is already in your quote request list.
-
1-1/2 HP Abrasive Belt Drive Motor, TEFC 4″ X 132″ Abrasi...$6,990.00This product is already in your quote request list.
-
3 HP Abrasive Belt Drive Motor, TEFC 6″ X 132″ Abrasive B...$7,590.00This product is already in your quote request list.
