FREE SHIPPING ON NEW MACHINERY OVER $5,999

Northtech NT SRS-12NS 12″ STRAIGHT LINE RIP SAW ( 3-1/2″ depth of cut)

Northtech NT SRS-12NS 12″ STRAIGHT LINE RIP SAW ( 3-1/2″ depth of cut)

Categories Northtech Machine, Northtech Saws, Saws, Saws (Straight Line Rip) Tag Straight-line Rip Saws Brand: Northtech Machine

With its main 15 hp motor and a 12″ blade, you will be able to achieve a max. depth of cut of 3-1/2” with a 12” Blade. The 1HP variable feed will allow speeds from 45′ – 100′ / minute.

Add to Quote Request

Specs & Features

NT SRS12NS Straight Line Ripsaw

Features:

15HP Motor + 1HP feed motor (with Wye Delta soft start)
Mechanical variable speed (45′ – 100′ FPM) provides a speed range for all material types and thickness ranges of 3/16”- 3-1/2”.
Bottom & top kickback fingers
Rack and pinion fence for precise and quick positioning.
Digital electronic oiler provides maximum chain and race life.
15-1/2″ distance from column to blade.
8′ glue line tolerance.
Industrial series 10mw laser is included with steel bracket.
12″ x 50T laser-cut precision blade is included.
Motors and controls are with UL and CE-approved components.
(1) Toolbox
Warranty is one-year parts
All machines are tested stateside prior to shipment providing trouble-free start-up.

Specifications:

Main Motor Hp. = 15 hp.
Voltage/ Freq. = 230/460 Volt 60Hz
Phase = 3 Phase
Amp Requirement = 26/13 Amps
Feed Hp. = 1 Hp.
Feed System = 5-1/2” 50 Pad Steel Chain
Drive System = Variable Speed Pulley
Feed Speed = 45 – 100 FPM
Variable Speed = Manual Lever Adjustment
Elevation Style = Manual Wheel Adjustment
Elevation Sys. = Jack Screw / Linear Guides
Total Hp. = 16 Hp.
Electronics = CE Approved Components
Dual Voltage = 230/460 Volt
Control Voltage = 220V Control Voltage
Assisted Start = Wye Delta Arbor Motor
Pass-Line = 32”
Throat Capacity = 15-1/2”
Min. Length = 10” 2nd Roller to Kickback
Min. Thickness = 3/16″
Max. Thickness = 3-1/2”
Glue Line Rip = Guaranteed 8′ 4/4 stock @ 50 FPM
Blade Size = 12” Tungsten Carbide Tipped
No. of Teeth = 50 Tooth
Tooth Spacing = 3/4”
Blade Kerf = 4 mm
Dust Collection = (1) 5” @ 681 CFM
Arbor Diameter = 1” Arbor
Idle Rollers = (6) Idle Rollers
Hold Down Style = (6) Spring Loaded Hold Downs
Kickback Finger = Top/Bottom Kickback Fingers
Emergency Stop = Push Button
Safety Feature = Safety Interlock Switch
Oiler = Auto Oiler
Low Oil Warning = Low Oil Alarm
Fence Type = Industrial Cam Lock Quick Rel
Fence Dims. = 1-3/4” x 27”
Frame Const. = Cast Construction
Worktable Dims. = 31” x 49-3/8”
Table Const. = Cast Iron
Laser = 100mw Laser Light & Mount Bracket
Decible Rating = 86 dB
Net Weight = 1790 Lbs.
Gross Weight = 2018 Lbs.
Machine Dims. = 66” x 38” x 73”
Packaging Dims = 57” x 44” x 61”

Shipping

Please Contact us for a shipping quote for Pre-Owned Machinery and or New machinery below $6,000.

***Some restrictions apply for free freight on NEW machinery over $5,999. FREE freight is to a commercial address with a dock and or forklift. EXTRA FEES may apply to accessorials like restricted access, residential drops, liftgates, and excessive lengths.

Applies to lower 40 of the contiguous states only. AZ, CA, ID, MT, NV, OR, UT, & WA do not qualify for free shipping. We can split ship to these states from $5,999 and up. Free shipping does not apply to RazorGage, Oliver, nor JLT Machinery or other machines listed as not free shipping.

Literature, Manuals, and or Drawings

Financing & Leasing Options for Your Convenience!

360 Degree Machinery offers financing solutions with competitive rates, flexible terms, and a simple application. Take the hassle out of machinery purchases. Click Here to learn more now!

Description

NT SRS12NS Straight Line Ripsaw

Features:

15HP Motor + 1HP feed motor (with Wye Delta soft start)
Mechanical variable speed (45′ – 100′ FPM) provides a speed range for all material types and thickness ranges of 3/16”- 3-1/2”.
Bottom & top kickback fingers
Rack and pinion fence for precise and quick positioning.
Digital electronic oiler provides maximum chain and race life.
15-1/2″ distance from column to blade.
8′ glue line tolerance.
Industrial series 10mw laser is included with steel bracket.
12″ x 50T laser-cut precision blade is included.
Motors and controls are with UL and CE-approved components.
(1) Toolbox
Warranty is one-year parts
All machines are tested stateside prior to shipment providing trouble-free start-up.

Specifications:

Main Motor Hp. = 15 hp.
Voltage/ Freq. = 230/460 Volt 60Hz
Phase = 3 Phase
Amp Requirement = 26/13 Amps
Feed Hp. = 1 Hp.
Feed System = 5-1/2” 50 Pad Steel Chain
Drive System = Variable Speed Pulley
Feed Speed = 45 – 100 FPM
Variable Speed = Manual Lever Adjustment
Elevation Style = Manual Wheel Adjustment
Elevation Sys. = Jack Screw / Linear Guides
Total Hp. = 16 Hp.
Electronics = CE Approved Components
Dual Voltage = 230/460 Volt
Control Voltage = 220V Control Voltage
Assisted Start = Wye Delta Arbor Motor
Pass-Line = 32”
Throat Capacity = 15-1/2”
Min. Length = 10” 2nd Roller to Kickback
Min. Thickness = 3/16″
Max. Thickness = 3-1/2”
Glue Line Rip = Guaranteed 8′ 4/4 stock @ 50 FPM
Blade Size = 12” Tungsten Carbide Tipped
No. of Teeth = 50 Tooth
Tooth Spacing = 3/4”
Blade Kerf = 4 mm
Dust Collection = (1) 5” @ 681 CFM
Arbor Diameter = 1” Arbor
Idle Rollers = (6) Idle Rollers
Hold Down Style = (6) Spring Loaded Hold Downs
Kickback Finger = Top/Bottom Kickback Fingers
Emergency Stop = Push Button
Safety Feature = Safety Interlock Switch
Oiler = Auto Oiler
Low Oil Warning = Low Oil Alarm
Fence Type = Industrial Cam Lock Quick Rel
Fence Dims. = 1-3/4” x 27”
Frame Const. = Cast Construction
Worktable Dims. = 31” x 49-3/8”
Table Const. = Cast Iron
Laser = 100mw Laser Light & Mount Bracket
Decible Rating = 86 dB
Net Weight = 1790 Lbs.
Gross Weight = 2018 Lbs.
Machine Dims. = 66” x 38” x 73”
Packaging Dims = 57” x 44” x 61”