Features:
|
| Centralized control center with visual load meter and digital elevation control. |
| Power supply light with emergency stop control. |
| Individual start/stop controls for feed and sanding head. |
| Mechanical feed adjustment allows the operator to change desired feed speed from 16-47.2fpm. |
| Single 30HP TEFC motor rated for continuous use delivers constant power to sanding surfaces. |
| Triple V-belt drive for full power delivery to sanding surface. |
| Disc braking for rapid emergency stops. |
| Full access door with lock-on outbound side. |
| Each sanding head has quick-adjust belt tracking on the inbound side. |
| Strong 4-Jack elevation control for parallel, precise and repeatable sanding quality. |
| 1st Head 8″ 65 Shore Rubber Contact Drum |
| 1/4 Turn head lock with removable puck. * 2nd Combination Head with 4″ rubber contact drum with 65/70 Shore Platen. |
| 1/4 Turn head lock with removable puck. |
| Individual roller and platen adjustment. |
| Upper and lower elevation protection switches prevent the machine from crashing. |
| (8) 5″ dust port require 681 CFM @ point of extraction. |
| Dust port formed into machine body for superb fugitive dust control. |
| Belt tracking cycle speed is easily adjustable for product-specific oscillation. |
| All sanding heads are equipped with a quick switch pneumatic belt tensioner. |
| Single pneumatic hook up with regulator, filter, and master shut-off included. |
| Electronic belt tracking with automatic jet blow-off cleaner. |
| The belt monitoring switch shuts down the machine if a belt breaks as well as prevents the head from starting if not activated. |
| UL/CE certified controls and electrical components are neatly labeled and organized in the electrical cabinet. |
| All machines are tested stateside prior to shipment providing trouble-free start-up. |
| Toolbox and manual included. |
