Features
- Manually tiltable spindle from 0° to 52°! MIKRON has re-engineered the tilt system so that customers can now reach up to 52°, which the marketplace is demanding for crown mouldings, and many other applications. This new feature is standard on all newly manufactured MIKRON M645 Multi-Moulders!
- Digital readout by Accurate Technology. This is a digital read-out system which MIKRON can install for you. This is an optional component that will give you accurate depth of cut every time – within + or – 0.002″ / lin. ft. (+ or – 0.165mm/lin. m).
- Floating worktable
- Variable speed feed motor — 0 to 30 feet per minute
- Premium control unit — MIKRON has redesigned the electrical units to be more energy efficient and accommodate all voltage requirements. Now the feed motor runs from the same switch panel as the cutter head, and the electrical box is installed inside the base. This is standard on all newly manufactured MIKRON M645 Multi-Moulders! Please specify 220, 440, 480 or 575 voltage requirements at time of ordering.
- Separately adjustable feed rollers to enable multiple passes
- Axial adjustment
- Mechanically adjustable fence for accurate, easy positioning
- Linear tracking system guides the work piece smoothly and directly under the cutter head, while keeping it flat
- Go from straight to curve in just one setup — no accessories required
- Maximum cut is 6″ wide by 6-1/2″ thick
- Uses a standard 4″ diameter, 2 knife corrugated back cutter head (1 included)
Unit size 34″ W × 30″ D × 65″ H (5′ min. front-to-back clearance) Worktable 38″ W × 24″ D Weight Approx. 1,400 lbs Motor 5 HP Arbor 1¼” diameter, 6″ long Spindle 6,000 RPM (reversible) Feed rate 0 to 30 feet per minute (forward and reverse) Cutting circle Horizontal: 6½” max · Tilted: 6″ max Thickness capacity 7″ max Cutter head Standard 4″ diameter, 2-knife corrugated back (1 included)
