Northtech NT AW-400PBX Horizontal Bandsaw

Specifications:

• Main Motor Hp. = 40 hp.
• Voltage/ Freq. = 460 Volt 60Hz
• Phase = 3 Phase
• Amp Requirement = 65 Amps
• Feed Hp. = 3 Hp.
• Feed System = 15-1/4” x 215-3/8” Belt
• Drive System = Motor Mated to Gear Box
• Feed Speed = 0 – 120 FPM
• Variable Speed = Inverter Controlled
• Elevation Hp. = 1 Hp.
• Elevation Style = CHPC-535 Elevation Control
• Elevation Sys. = (2) Post Jack Screw
• Total Hp. = 45 Hp.
• Electronics = UL Approved Components
• Control Voltage = 220V Control Voltage
• Min. Length = Individual Feed 20”
• Min. Width = 2″
• Max. Width = 17-1/2”
• Min. Thickness = 1/8”
• Max. Thickness = 10”
• Blade Size = 2” x 208”
• No. of Teeth = 208
• Tooth Spacing = 1”
• Blade Kerf = .086 In.
• Blade Speed = 4700 – 6750 FPM
• Tracking Style = Manual Adjustment
• Tension Style = Pneumatic / Hydraulic Tension
• Vertical Travel = 1/8” – 10”
• Dust Collection = (2) 6” @ 1962 CFM
• Dust Port Out = (2) 6” Ports
• Digital Display = Elevation
• Conveyor = 15-1/4” x 215-3/8”
• Hold Down Style = Pneumatic / Gravity
• FLR Included = Filter, Lubricator, Regulator
• Recommended CFM = 1000 CFM @ Extraction Point
• Emergency Stop = Push Button
• Rear E Stop = Push Button
• Guarding = Full Cabinet Enclosure
• Oiler = Blade Oil Mister
• Tiltable = 30 Degree Tilt
• Blade Guide = Steel Blade Guides
• Wheel Dims. = 1-3/4” x 33-1/2”
• Wheel Cnstr. = Steel Construction
• Frame Const. = 1/4” Steel Construction
• Worktable Dims. = 15” x 109”
• Table Const. = Steel
• Return Conveyor = 7-1/4” x 218” Belt
• Decible Rating = 80 dB
• Net Weight = 3674
• Gross Weight = 4090 Lbs.
• Machine Dims. = 117” x 100” x 88”
• Packaging Dims = 120” x 102” x 90”