Features:
- Saw arbor motor: 50 HP
- Feed motor: 2 HP (3HP on request)
- (1) 100 mW Laser Light Included
- Max. cutting thickness: 4.7” (120mm)
- Max. cutting thickness (w/short stock device): 95 mm (3.74″) (optional)
- Max. cutting width: 300 mm (12″)
- Distance from column to link chain center: 29-1/2”
- Min. working length: 500 mm (19.685″)
- Min. working length (w/short stock device): 300 mm (11.811″) (optional)
- Max. saw blade diameter: 15”
- Min. saw blade diameter” 10”
- Saw blade bore: 70 mm
- Saw arbor diameter: 50 mm
- Saw arbor speed: 3775 RPM
- Variable feed speed: 25-100 FPM
- Hold down roller elevating motor: 0.5 HP
- Table area (LxW): 60″x30″
- Machine dimensions (LxWxH): 81” x 61” x 70”
- Packing dimensions (LxWxH): 65” x 68” x 65”
- Net weight: 4,525 lbs.
- Gross Weight: 4725 Lbs.
- Warranty is one-year parts
- All machines are tested stateside prior to shipment providing trouble-free start-up.
Specifications:
- Main Motor Hp. = 50 Hp.
- Voltage/ Freq. = 230/460 Volt 60Hz
- Phase = 3 Phase
- Amp Requirement = 68.4/34.2 Amps
- Feed Hp. = 2/1 Hp. 2 Speed
- Feed System = 12” Dip Chain
- Drive System = Variable Speed Pulley
- Feed Speed = 25 – 100 FPM
- Variable Speed = 229 Variable Speed Pulley
- Elevation Hp. = 1/2 Hp.
- Elevation Style = Push Button
- Elevation Sys. = Jack Screw / Linear Guides
- Total Hp. = 52.5 Hp.
- Electronics = CE Approved Components
- Dual Voltage = 230/460 Volt
- Control Voltage = 110 Volt
- Assisted Start = Wye-Delta
- Throat Capacity = 29-1/2”
- Min. Length = 13” 1st Roller to Kickback
- Min. Thickness = 1/16”
- Max. Thickness = 4.7”
- Arbor Rpm = 3775 Rpm.
- Blade Size = 12” Tungsten Carbide Tipped
- No. of Teeth = 36 Tooth
- Tooth Spacing = 1-1/8”
- Blade Kerf = .160 In.
- Tension Style = Gravity
- Dust Collection = (2) 6” @ 1962 CFM
- Dust Port Out = (2) 6” Ports
- Arbor Diameter = 50 mm
- Idle Rollers = (4) Top Idle Rollers
- Hold Down Style = (4) Spring Loaded Rollers
- Kickback Finger = (2) Top Sets (1) Bottom Set
- Rear E Stop = Push Button
- Safety Feature = Safety Interlock Switch
- Guarding = Full Cabinet Enclosure
- Oiler = Auto Oiler
- Low Oil Warning = Low Oil Shut Off / Warning
- Fence Type = Adjustable
- Fence Dims. = 2-1/4” x 27-1/2”
- Frame Const. = 3/4” Steel Construction
- Worktable Dims. = 30” x 60”
- Table Const. = Cast Iron
- Laser = 100mw Laser Light & Mount Bracket
- Decible Rating = 75 dB
- Net Weight = 4525 Lbs.
- Gross Weight = 4725 Lbs.
- Machine Dims. = 81” x 61” x 70”
- Packaging Dims = 66” x 30” x 53”
