Features
- 10HP motor, 3PH 230V with 24V magnetic controls
- 18” 120T Carbide tipped blade included
- 1” Saw arbor diameter
- Cycle operation: Pneumatic
- Table size: 26” x 27.25”
- Quick access in the front of the machine to adjust blade stroke.
- Dust requirements: (1) 4″ dust port requiring 450 CFM at point of extraction
- Net weight: 730 lbs.
- Gross weight: 890 lbs.
- Packing dimensions: (L) 33″ x (W) 33″ x (H) 46″
- (1) Toolbox and manual
- Warranty is one-year parts
- All machines are tested stateside prior to shipment providing trouble-free start-up.
Cut Capacities
- Max cutting capacity: 1” x 13-1/2”, 2″ x 12″, 3″ x 11″, 4″ x 10″
Options
- 8’ infeed and 8’ outfeed with fence, legs, (2)gravity flip stops
- 16’ infeed and 16’ outfeed with fence, legs (4) sets, (2) gravity flip stops
- Custom infeed/outfeed rollers up to 40’
- 18″ x 80T carbide-tipped blade
- 18” x 100T carbide-tipped blade
- 18” x 120T carbide-tipped blade
- (1) Gravity flip stop
- 460V 3-phase power
- Safety interlock for blade access
- Rigid stop
Specifications
- Main Motor Hp. = 10 hp.
- Voltage/ Freq. = 230 Volt 60Hz
- Phase = 3 Phase
- Amp Requirement = 24 Amps
- Electronics = CE Approved Components
- Dual Voltage = 230/460 Volt
- Control Voltage = 24 Volt Control Voltage
- Cut Envelope = 1” x 13” 2” x 12” 4” x
- Min. Length = 14” from Blade to Gaurd Edge
- Max. Width = 1” x 13”
- Max. Thickness = 5”
- Arbor Rpm = 3600 Rpm
- Blade Size = 18” Tungsten Carbide-Tipped
- No. of Teeth = 120 Tooth
- Tooth Spacing = 15/32 In.
- Blade Kerf = .135 In.
- Dust Collection = 4” 450 CFM
- Dust Port Out = 4” Bottom
- Arbor Diameter = 1”
- Cycles/Minute = 45 Cuts Per Minute
- Hold Down Style = T Clamp
- FLR Included = Filter, Lubricator, Regulator
- Recommended CFM = 480 nl/min
- Emergency Stop = Push Button
- Safety Feature = Safety Interlock Switch
- Guarding = High Visibility Guarding
- Operation Style = Pneumatic Foot Pedal
- Fence Type = Adjustable Fence
- Fence Dims. = 2″ x 25”
- Adjust. Stroke = 2-3/4” Adj. on Arbor Stroke
- Frame Const. = 1/4” Steel Construction
- Worktable Dims. = 26” x 27-1/4”
- Table Const. = Machined Steel
- Decible Rating = 78 dB
- Net Weight = 730 Lbs.
- Gross Weight = 890 Lbs.
- Machine Dims. = 26” x 27-1/4” x 49-1/2”
- Packaging Dims = 40” x 48” x 55”
