FREE SHIPPING ON NEW MACHINERY OVER $5,999
profile [#1341]Created with Sketch.

Your Account

Need Help?

Call Us: (630) 229-6705

Connect With Us

Northtech NT CS14R 14″ 7.5HP Upcut Saw (Right-Hand Cut)

Northtech NT CS14R 14″ 7.5HP Upcut Saw (Right-Hand Cut)

Categories , , , , Tags , Brand:

This innovative up-cut saw from Northtech quickly and safely cuts boards up to 11 inches wide or 3 inches high. The 3-phase 7.5 HP soft-start motor and 14″ diameter blade consistently produce clean and accurate results. Up to 16′ infeed/outfeed tables with flip-stops are optionally available to further improve operator precision and productivity.

*Be sure to ask us about Northtech’s new “UCS” up-cut saw models, which offer advanced features such as extra dust collection and a full zero-clearance fence to help eliminate tear-out!

Add to Quote Request
Features
  •  7.5 HP motor, 3PH 230/460V with 24V magnetic controls
  • 14” 100T Carbide tipped blade included
  • 1” Saw arbor diameter
  • Cycle operation:  Pneumatic
  • Table size:  25” x  23-1/4”
  • Quick access in front of the machine to adjust blade stroke.
  • Dust requirements:  (1) 4″ dust port requiring 450 CFM at point of extraction
  • Net weight:   548 lbs.
  • Gross weight:   685 lbs.
  • Packing dimensions:  (L) 30″ x (W) 30″ x (H) 51″
  • (1) Toolbox and manual
  • Warranty is one-year parts
  • All machines are tested stateside before shipment providing trouble-free start-up.
Cut Capacities
  • Max cutting capacity:  1″ x 11″, 2″ x 10″, 3″ x 7-1/2″
Options
  • 8’ infeed and 8’ outfeed with fence, legs, (2)gravity   flip stops  
  • 16’ infeed and 16’ outfeed with fence, legs (4) sets, (2)   gravity flip stops   
  • Custom infeed/outfeed up to 20’ long  
  • 14″ x 72T carbide-tipped blade (standard with saw)   
  • 14” x 80T carbide-tipped blade   
  • 14″ x 100T carbide-tipped blade  
  • Gravity flip stops
  • 230V 3-phase power
  • Double palm button actuation instead of foot pedal   
  • Safety interlock for blade access   

Specifications

  • Main Motor Hp. = 7.5 hp.
  • Voltage/ Freq. = 230/460 Volt 60Hz
  • Phase = 3 Phase
  • Amp Requirement = 18.4/9.2 Amps
  • Electronics = CE Approved Components
  • Dual Voltage = 230/460 Volt
  • Control Voltage = 24 Volt Control Voltage
  • Pass-Line = 33-3/4”
  • Cut Envelope = 1” x 11” 2” x 10” 3” x
  • Min. Length = 12” from Blade to Gaurd Edge
  • Max. Width = 1” x 11”
  • Max. Thickness = 3-3/8″
  • Arbor Rpm = 4260 Rpm
  • Blade Size = 14” Tungsten Carbide-Tipped
  • No. of Teeth = 100 Tooth
  • Tooth Spacing = 15/32 In.
  • Blade Kerf = .125 In.
  • Dust Collection = 4” 450 CFM
  • Dust Port Out = 4” Bottom
  • Arbor Diameter = 1” Arbor
  • Cycles/Minute = 78 Cuts Per Minute
  • Hold Down Style = T Clamp
  • Recommended CFM = 480 nl/min
  • Emergency Stop = Push Button
  • Safety Feature = Safety Interlock Switch
  • Guarding = Full Guard with Clear View
  • Operation Style = Pneumatic Foot Pedal
  • Fence Type = Adjustable Fence
  • Fence Dims. = 2″ x 25”
  • Adjust. Stroke = 2-1/16” Adj. on Arbor Stroke
  • Frame Const. = 3/16” Steel Construction
  • Worktable Dims. = 23-1/4” x 24-7/8”
  • Table Const. = Machined Steel
  • Decible Rating = 75 dB
  • Net Weight = 548 Lbs.
  • Gross Weight = 685 Lbs.
  • Machine Dims. = 23-1/4” x 24-7/8” x 47”
  • Packaging Dims = 40” x 48” x 50”

Please Contact us for a shipping quote for Pre-Owned Machinery and or New machinery below $6,000.

***Some restrictions apply for free freight on NEW machinery over $5,999. FREE freight is to a commercial address with a dock and or forklift. EXTRA FEES may apply to accessorials like restricted access, residential drops, liftgates, and excessive lengths.

Applies to lower 40 of the contiguous states only. AZ, CA, ID, MT, NV, OR, UT, & WA do not qualify for free shipping. We can split ship to these states from $5,999 and up. Free shipping does not apply to RazorGage, Oliver, nor JLT Machinery or other machines listed as not free shipping.

Financing & Leasing Options for Your Convenience!

360 Degree Machinery offers financing solutions with competitive rates, flexible terms, and a simple application. Take the hassle out of machinery purchases. Click Here to learn more now!

Features
  •  7.5 HP motor, 3PH 230/460V with 24V magnetic controls
  • 14” 100T Carbide tipped blade included
  • 1” Saw arbor diameter
  • Cycle operation:  Pneumatic
  • Table size:  25” x  23-1/4”
  • Quick access in front of the machine to adjust blade stroke.
  • Dust requirements:  (1) 4″ dust port requiring 450 CFM at point of extraction
  • Net weight:   548 lbs.
  • Gross weight:   685 lbs.
  • Packing dimensions:  (L) 30″ x (W) 30″ x (H) 51″
  • (1) Toolbox and manual
  • Warranty is one-year parts
  • All machines are tested stateside before shipment providing trouble-free start-up.
Cut Capacities
  • Max cutting capacity:  1″ x 11″, 2″ x 10″, 3″ x 7-1/2″
Options
  • 8’ infeed and 8’ outfeed with fence, legs, (2)gravity   flip stops  
  • 16’ infeed and 16’ outfeed with fence, legs (4) sets, (2)   gravity flip stops   
  • Custom infeed/outfeed up to 20’ long  
  • 14″ x 72T carbide-tipped blade (standard with saw)   
  • 14” x 80T carbide-tipped blade   
  • 14″ x 100T carbide-tipped blade  
  • Gravity flip stops
  • 230V 3-phase power
  • Double palm button actuation instead of foot pedal   
  • Safety interlock for blade access   

Specifications

  • Main Motor Hp. = 7.5 hp.
  • Voltage/ Freq. = 230/460 Volt 60Hz
  • Phase = 3 Phase
  • Amp Requirement = 18.4/9.2 Amps
  • Electronics = CE Approved Components
  • Dual Voltage = 230/460 Volt
  • Control Voltage = 24 Volt Control Voltage
  • Pass-Line = 33-3/4”
  • Cut Envelope = 1” x 11” 2” x 10” 3” x
  • Min. Length = 12” from Blade to Gaurd Edge
  • Max. Width = 1” x 11”
  • Max. Thickness = 3-3/8″
  • Arbor Rpm = 4260 Rpm
  • Blade Size = 14” Tungsten Carbide-Tipped
  • No. of Teeth = 100 Tooth
  • Tooth Spacing = 15/32 In.
  • Blade Kerf = .125 In.
  • Dust Collection = 4” 450 CFM
  • Dust Port Out = 4” Bottom
  • Arbor Diameter = 1” Arbor
  • Cycles/Minute = 78 Cuts Per Minute
  • Hold Down Style = T Clamp
  • Recommended CFM = 480 nl/min
  • Emergency Stop = Push Button
  • Safety Feature = Safety Interlock Switch
  • Guarding = Full Guard with Clear View
  • Operation Style = Pneumatic Foot Pedal
  • Fence Type = Adjustable Fence
  • Fence Dims. = 2″ x 25”
  • Adjust. Stroke = 2-1/16” Adj. on Arbor Stroke
  • Frame Const. = 3/16” Steel Construction
  • Worktable Dims. = 23-1/4” x 24-7/8”
  • Table Const. = Machined Steel
  • Decible Rating = 75 dB
  • Net Weight = 548 Lbs.
  • Gross Weight = 685 Lbs.
  • Machine Dims. = 23-1/4” x 24-7/8” x 47”
  • Packaging Dims = 40” x 48” x 50”

Related products