Taylor #911A- Taylor Return System for Shaper Sander
Taylor #911A- Taylor Return System for Shaper Sander
Customize a Return Conveyor to fit your Shaper Sander
and Door Department
Features:
- (4) machine lengths return material up to 60″, 96″, 112″ long, or 132″ Long
- Heavy duty frame and component construction for long life(Heavier than the competition)
- Fixed Catch Area
- 24″ or 36″ Rollers on return conveyors can handle up to 36″ or 50″ wide material.
- Optional 48″ Catch Rollers
- Minimum material size 1″ x 6″
- Roller Spacing 3″ center to center
- All rollers are powered and individually clutched for long belt life.
- Any Length Return (in one foot increments, measured from tail end of shaper/sander) composed of modular sections.
- Return is 2 1/2″ lower than receiving conveyor, allowing for over/under return.
- Variable Speed AC drive matches conveyor feed rate to edge bander feed rate.
- Adjustable Height to match pass line height of the Shaper Sander
- Compatible with many brands of Shaper Sander
Return Conveyors on a Shaper Sander have a fast payback. Most doors or panels need at least 2 passes, if not 4, through the machine to be fully machined. This normally would require (2) Operators, one to feed, and one to catch. With a Taylor Return, productivity is increased by 100% or more because it makes a (2) operator job into a (1) operator job.
(Additional Details and Info Below)
Specs & Features
- Return on Investment: With our competitive pricing, the payback period is very fast. The cost of a new machine is typically less than one year’s wages.
- Quality and Innovation: Taylor’s 105 years in business and our four Challenger Awards assures a U.S.-made machine high on quality and long on innovation
- Fast Delivery and Easy Setup: All machines are built in our Upstate New York factory in eight weeks or less. Every machine is fully assembled here and ships 80-90% assembled. You will be up and running in hours
- Sales and Support: Because we design, build, test and ship at one facility, we understand the needs of the customer. Year in and year out, we are regarded as one of the best sales support companies in the woodworking industry
When you buy a Taylor Return Conveyor, you buy more than a machine, you buy into a company that partners with you to make your company productive. Cameron Automation is a division of James L. Taylor which has served the woodworking industry for over 100 years. In that time, we have developed and maintained a level of customer service and products that are second to none.
Our machines are American made. From where Terry unloads raw steel from trucks to where Monty packs a completed machine for shipping, it’s all done here in the US. We maintain a large inventory of parts ready for next day delivery. We support our customers with an available and knowledgeable service staff. Our service is second to none. Just ask any of our thousands of satisfied customers
|
Base Model
|
A | B | C | D | E |
| #38A-24C-24R-5L Model
24” Wide Receiving Rollers and 24” Wide Return Rollers Returns Panels up to 36” Wide and 60” Long |
60″ | 62″ | 24″ | 64″ | Any |
| #38A-36C-36R-5L Model
36” Wide Receiving Rollers and 36” Wide Return Rollers Returns Panels up to 50” Wide and 60” Long |
84″ | 62″ | 36″ | 112″ | Any |
| #38A-36C-36R-7L Model
36” Wide Receiving Rollers and 36” Wide Return Rollers Returns Panels up to 50” Wide and 84” Long |
84″ | 74″ | 36″ | 112″ | Any |
| #38A-36C-36R-8L Model
36” Wide Receiving Rollers and 36” Wide Return Rollers Returns Panels up to 50” Wide and 96” Long |
84″ | 86″ | 36″ | 112″ | Any |
- Components exit your edgebander, sander, or rip saw
- Our catch is equipped with powered rollers which feed the component completely onto the catch section
- A sensor is used to activate cylinder and lower the catch and place the component onto traverse belts
- Traverse belts carry the component sideways onto the return section
- The return is equipped with powered rollers to start the component back to the operator
- The return extension carries the component back to the infeed end
Shipping
FREE SHIPPING DOES NOT APPLY TO PRE-OWNED MACHINERY
Please Contact us for a shipping quote for Pre-Owned Machinery and or New machinery below $6,000.
***Some restrictions apply for free freight on NEW machinery over $5,999. FREE freight is to a commercial address with a dock and or forklift. EXTRA FEES may apply to accessorials like restricted access, residential drops, liftgates, and excessive lengths.
Applies to lower 36 of the contiguous states only. AZ, CA, CO, ID, MT, ND, NV, OR, SD, UT, WA, & WY do not qualify for free shipping. We can split ship to these states from $5,999 and up. Free shipping does not apply to RazorGage, Oliver, nor JLT Machinery or other machines listed as not free shipping.
Manuals & Technical Documents
Conveyor Brochure360 Degree Machinery offers financing solutions with competitive rates, flexible terms, and a simple application. Take the hassle out of machinery purchases. Click Here to learn more now!
Related products
-
-
-
The Taylor Automated is the Industry’s Standard in Room Temp...