FREE SHIPPING ON NEW MACHINERY OVER $5,999
profile [#1341]Created with Sketch.
Request a quote

Your Account

Need Help?

Call Us: (630) 229-6705

Connect With Us

Evans Midwest VP 418C Vacuum Press

Evans Midwest VP 418C Vacuum Press

Categories , , Tag Brand

Clamshell vacuum press for single-panel SIP production, sized for 4 ft x 8 ft panels and holding pressure across the panel while the polyurethane adhesive cures. Runs Busch vacuum pumps and pairs with the BE 418T Standard SIP Laminating System.

Add to Quote Request

Evans Midwest VP 418C Vacuum Press

Adhesive does not cure properly if the panel moves or the bond line opens up. The VP 418C solves that end of the job: it is the vacuum press in Evans Midwest’s single-panel SIP setup, taking a 4 ft x 8 ft panel, drawing it down and holding pressure evenly across the whole face while the polyurethane cures.

Where It Sits in the Line

Evans Midwest pairs the VP 418C with the BE 418T Standard SIP Laminating System for single-panel processing. The BE lays the adhesive down; the press holds the assembly together until the bond is made.

Vacuum From Busch Pumps

The press runs Busch vacuum pumps, the same pump brand Evans specifies across its vacuum press line.

Clamshell Format

Evans Midwest builds its clamshell vacuum presses on a welded tube frame, with a rear-mounted electrical enclosure and an operator interface running a PLC-controlled cycle.

Specifications

Type Clamshell vacuum press
Panel size 4 ft x 8 ft
Application Single-panel SIP production; holds pressure during adhesive cure
Adhesive Single-part, moisture-cure polyurethane (SIP process)
Vacuum Busch vacuum pumps
Pairs with BE 418T Standard SIP Laminating System
Press construction Welded tube frame with rear-mounted electrical enclosure (Evans clamshell press build)
Controls Operator interface, PLC-controlled cycle (Evans clamshell press build)
Model VP 418C

Contact 360 Degree Machinery

Call 630-229-6705 or request a quote online and we will spec the VP 418C alongside your SIP line.

FREE SHIPPING DOES NOT APPLY TO PRE-OWNED MACHINERY

Please Contact us for a shipping quote for Pre-Owned Machinery and or New machinery below $6,000.

***Some restrictions apply for free freight on NEW machinery over $5,999. FREE freight is to a commercial address with a dock and or forklift. EXTRA FEES may apply to accessorials like restricted access, residential drops, liftgates, and excessive lengths.

Applies to lower 36 of the contiguous states only. AZ, CA, CO, ID, MT, ND, NV, OR, SD, UT, WA, & WY do not qualify for free shipping. We can split ship to these states from $5,999 and up. Free shipping does not apply to RazorGage, Oliver, nor JLT Machinery or other machines listed as not free shipping.

Financing & Leasing Options for Your Convenience!

360 Degree Machinery offers financing solutions with competitive rates, flexible terms, and a simple application. Take the hassle out of machinery purchases. Click Here to learn more now!

Related products