NT ES1248SE Edge Sander
• 7.5HP main motor; 3PH, 230V/460V Dual Voltage
• 12mm (1/2″) oscillating stroke
• Drive wheel: 7″ x 12″
• Easy elevation control through manual worm gear
• Side table dimensions: 10″ x 48″
• Side table tilt 0 – 45 Degrees
• End table dimensions: 13-3/4″ x 16-1/2″
• End table tilt: 0 – 45 Degrees
• Sanding belt size: 12″ x 136″ (Included)
• Sanding belt speed: 60HZ, 3200 FPM
• Platen size: 12″ x 48″
• Dust ports: (2) 4″
• Easy jig fences are standard for squaring accuracy and part stability
• Machine Dimensions: 69″ x 25″ x 49″
• Packaging Dimensions: 82” x 30” x 55”
• Net weight: 977 lbs.
• Gross weight: 1,003 lbs.
• (1) Tool box
• Warranty is one year parts
• All machines are tested stateside prior to shipment providing trouble free start up.
- Direct Drive = Motor to 7” x 12” Pulley
- Machine Hp. = 7.5 hp.
- Voltage/ Freq. = 230 Volt 60Hz
- Phase = 3 Phase
- Amp Requirement = 22 Amps
- Elevation Style = Manual Wheel Adjustment
- Electronics = CE Approved Components
- Dual Voltage = 230/460 Volt
- Control Voltage = 24 Volt Control Voltage
- Pass-Line = 32”
- Sandpaper Size = 12” x 136”
- Platen Specs. = 12” x 48”
- Drum Specs. = 7”x 12” Steel 4-3/4”x 12.5′
- Roller Type = Steel / Rubber
- Oscillation Sty = Gear Box Driven
- Oscillation Trv = 1/2”
- Tracking Style = Manual Adjustment
- Tension Style = Manual Adjustment
- Dust Collection = (2) 4” @ 900 CFM
- Dust Port Out = 2 4” Top
- Emergency Stop = Push Button
- Guarding = High Visibility Guarding
- Tiltable = 45 Degrees
- Frame Const. = 3/16” Steel Construction
- End Table Dims. = 13-3/4” x 16-1/2”
- Side Table Dim. = 10” x 48”
- Table Const. = Steel
- Decible Rating = 77 dB
- Net Weight = 977 Lbs.
- Gross Weight = 1003 Lbs.
- Machine Dims. = 69” x 25” x 49”
- Packaging Dims = 82” x 30” x 55”