Features:
Production Rate: |
| The CTD N90 is capable of cycling at up to 10 strokes per minute. However, actual production rates vary with the type and width of material to be cut. |
Spindle Arbor |
| Both mounted on preloaded and sealed ball bearings with a 2-belt drive. |
Floor Stand: |
| Close-coupled heavy gauge steel stand completely enclosed with 6″ dust outlet. 1200 CFM required. |
Table Base: |
| Precision machined and ground iron castings with milled keyways to guide fences; allow for easy and accurate dimensional changes. |
Specifications:
Saw Type: |
Vertical Frame and Notching Saw |
Blade Capacity: |
18″ |
Arbor: |
1″ (25mm) with 3-1/2″ (89mm) Saw Collars |
Motor HP: |
5HP |
Motor Voltage: |
230/460 Volt, 3 Phase |
Motor Speed: |
2800 RPM |
Starter: |
Magnetic Starter |
Cutting Capacity (Toe Notch Configuration): |
7″ x 7″ Deep x 4″ High |
Table Height: |
36″ (91.5cm) From Floor |
Actuation |
Pneumatic Foot Valve with Cover |
Air Pressure Requirement: |
100 psi (5.4 kg/㎠) |
Air Consumption: |
6 CFM @ 100 PSI (0.17 ㎥/min @ 7.03 kg/㎠) *Based on 6 Strokes per Minute |
Dust Collection: |
6″ Dust Outlet
*1200 CFM Required |
Machine Dimensions (Standard Machine): |
42″ (107cm) Wide x 42″ (107cm) Front To Back x 62″ (157cm) High |
Machine Weight: |
900 Lbs. (410kg) |
Options:
| Table | ||||
| Part# | Description | Price | ||
| T72 | 6′ Extended table work support. 12″ wide x 72″ long | $575 | ||
| T60HD | 5′ Heavy duty table work support. 15″ W x 60″ L made | $675 | ||
| with heavy gage steel | ||||
| RC-5 | 5′ Roller conveyor. Included: One leg and 3 steel rollers {$25.00 each PVC} | $650 | ||
| T60RT | 60″ Roller table for mounting electronic gage (10 rollers) {$15.00 each PVC} | $1,075 | ||
RC-5 T72
| Fence Length Gage | ||||
| Part# | Description | Price | ||
| FEX | Front extended fence gage. 5/8″ x 2″ fence with measuring | |||
| tape stop and clamp; measures outside miter dimension. | ||||
| 6′ long measures 68″ | $475 | |||
| 10′ long measures 116″ | $575 | |||
| 12′ long measures 140″ | $645 | |||
| REX | Rear extended fence gage. Same as item Fex but reversed. | |||
| 6′ long measures 68″ | $525 | |||
| 10′ long measures 116″ | $625 | |||
| 12′ long measures 140″ | $675 | |||
| FLP-D45 | Production flip stop. (add to FEX / REX) | $195 | ||
| ASTP | Air Stop. Push the button to move stop to desired dimension, | $450 | ||
| release the button and stop locks. | ||||
| THC | Two hand control saw blade operation | $935 | ||
| DIG/EXF | Digital length measurement fence. Item EXF with digital | |||
| measuring scale and display. | ||||
| 6′ length | $2,795 | |||
| 10′ length | $3,495 | |||
Measuring Gages |
||||
| Part# | Description | Price | ||
| VIS | VISION GAGE SS: For measuring inside, rabbet or outside | |||
| dimension of moulding. Lines are etched and painted at 45 | ||||
| degrees to front fence in 3 different colors in 1/8″ increments. | ||||
| SS gage is made for right hand mounting only and is 6″ wide. | ||||
| 6′ Long | $2,995 | |||
| 10′ long | $3,995 | |||
| Optional Accessories | ||||
| Part# | Description | Price | ||
| 3H3 | 3 HP 3 Phase 230/460 volt motor for D45AX, D45AX14, or N80 | $625 | ||
| 5H3 | 5 HP 3 Phase 230/460 volt motor for N90 | $725 | ||
| 575V | 575 volt motor for machine | $2,400 | ||
| 50C | 50Hz motors, 2950 RPM for models | D45AX | $350 | |
| N80/N90 | $550 | |||
| AG | Air Gun | $130 | ||
| HYD | Hydrocheck unit provides smoother slow-speed action | $1,625 | ||
| when cutting heavy extrusions or hardwoods. D45AX only | ||||
| B3P153E | Skip Check for quick cycling of saw head using HYD until you start | $895 | ||
| cutting thru your parts (New machine install only) | ||||
| VC3 | Vertical air clamp (one side – please specify) | $325 | ||
| HC3 | Horizontal air clamp (one side – please specify) | $350 | ||
| PR | Pressure regulator | $160 | ||
| FMF | Front mitering fence. To convert staggered blade notching | $395 | ||
| machines to mitering machine. Must add length gage. | $495 | |||
| REV/FHC | Special front mount horizontal clamp(2) with reverse fence. | $1,095 | ||
| SLS | Saw blade lubrication system for use in cutting aluminum. | $625 | ||
| BIOL/45 | CTD double nozzle biolube lubrication system. Uses a pump | $2,250 | ||
| to lubricate blade. System uses minute amount of biodegradable oil. | ||||
| B3P141 | CTD biolube lubricant, per gallon | $95 | ||
| 10P01 | CTD Soluble oil, per gallon | $40 | ||
