Northtech NT CS20R-1034 20″ 10HP Upcut Saw (Right-Hand Cut) 460V

This innovative up-cut saw from Northtech quickly and safely cut boards up to 15-1/2 inches wide or 5-3/4 inches high. The powerful 10 HP soft-start motor and 20″ diameter blade reliably produce clean and consistent results. Up to 16′ infeed/outfeed tables with flip-stops are optionally available to further improve operator speed and accuracy.

*Be sure to ask us about the newly-available “UCS” up-cut saw models, which offer advanced features such as extra dust collection and a full zero-clearance fence to help eliminate tear-out!

Guaranteed Safe Checkout

Credit

FEATURES

  • 10HP motor, 3PH 460V with 24V magnetic controls
  • 20” Tungsten Carbide tipped blade included
  • 1” Saw arbor diameter
  • Cycle operation: Pneumatic
  • Quick access on the front of the machine to adjust blade stroke.
  • Safety interlock for blade access
  • Table size: 20” x 26”
  • 2700 RPM
  • Net / Gross weight: 788 lbs. / 874 lbs.
  • Packing dimensions: (L) 30″ x (W) 35″ x (H) 51″
  • (1) Toolbox and manual
  • Warranty is one-year parts
  • All machines are tested stateside prior to shipment providing trouble-free startup.

Cut Capacities

  • Cut capacity with Factory Fence: 1’’ x 14.5’’, 2’’ x 14’’, 3’’ x 13’’, 4’’ x 12’’, 5’’ x 11’’
  • Cut capacity without Factory Fence: 1’’ x 15.5’’, 2’’ x 15-1/8’’, 3’’ x 14-3/8’’, 4’’ x 13.5’’, 5-3/4’’ x 9-1/2’’

Specifications

  • Main Motor Hp. = 10 hp.
  • Voltage/ Freq. = 460 Volt 60Hz
  • Phase = 3 Phase
  • Amp Requirement = 12 Amps
  • Electronics = UL Approved Components
  • Dual Voltage = 230/460 Volt
  • Control Voltage = 24 Volt Control Voltage
  • Pass-Line = 36”
  • Cut Envelope = 1” x 15-1/2”, 5-3/4” x 9-1/
  • Max. Width = 17-1/4”
  • Max. Thickness = 5-7/8”
  • Arbor Rpm = 2700 Rpm
  • Blade Size = 20” Tungsten Carbide Tipped
  • No. of Teeth = 120 Tooth
  • Tooth Spacing = 1/2”
  • Blade Kerf = .141”
  • Dust Collection = (1) 4” @ 450 CFM
  • Arbor Diameter = 1” Arbor
  • Cycles/Minute = 40 Cuts Per Minute
  • Hold Down Style = T Clamp
  • FLR Included = Filter, Lubricator, Regulator
  • Recommended CFM = 3/8” Supply Line @ 90 Psi
  • Emergency Stop = Push Button
  • Safety Feature = Safety Interlock Switch
  • Guarding = High Visibility Guarding
  • Operation Style = Pneumatic Foot Pedal
  • Fence Type = Adjustable Fence
  • Fence Dims. = 2″ x 25”
  • Worktable Dims. = 21-1/2” x 67”
  • Table Const. = Cast Iron
  • Decible Rating = 75 dB
  • Net Weight = 788 Lbs.
  • Gross Weight = 874 Lbs.
  • Machine Dims. = 42” x 34” x 54-1/2”
  • Packaging Dims = 35” x 30” x 51”

Additional information

Maximum Blade Diameter

20"

Horsepower

10

Voltage

460V

Power Phase

Three Phase