Northtech NT CS18LPBA‑1032 18″ 10 HP Upcut Saw With Dual Palm Buttons (Left‑Hand Cut) 230V

This innovative up-cut saw from Northtech quickly and safely cuts boards up to 13-1/2 inches wide or 4 inches high. The powerful 10 HP soft-start motor and 18″ diameter blade consistently produce clean and accurate results. This model is equipped with a double-palm button start for increased safety. Up to 16′ infeed/outfeed tables with flip-stops are optionally available to further improve operator precision and productivity.

*Be sure to ask us about Northtech’s new “UCS” up-cut saw models, which offer advanced features such as extra dust collection and a full zero-clearance fence to help eliminate tear-out!

Guaranteed Safe Checkout

Credit

northtech-nt-cs18lpba-1032-18-10hp-up-cut-saw-with-dual-palm-buttons-left-hand-cut-230v
Northtech NT CS18LPBA‑1032 18″ 10 HP Upcut Saw With Dual Palm Buttons (Left‑Hand Cut) 230V
Request a call back
(*Optional)
Features
  •    10HP motor, 3PH  230V with 24V magnetic controls
  •    18” 120T Carbide tipped blade included
  •    1” Saw arbor diameter
  •    Cycle operation:  Pneumatic
  •    Table size:  26” x  27.25”
  •    Quick access in the front of the machine to adjust blade stroke.
  •    Dust requirements:  (1) 4″ dust port requiring 450 CFM at point of extraction
  •    Net weight:   730 lbs.
  •    Gross weight:   890 lbs.
  •    Packing dimensions:  (L) 33″ x (W) 33″ x (H) 46″
  •    (1) Toolbox and manual
  •    Warranty is one-year parts
  •    All machines are tested stateside prior to shipment providing trouble-free start-up.
Cut Capacities
  •    Max cutting capacity: 1” x 13-1/2”,  2″ x 12″, 3″ x 11″, 4″ x 10″
Options
  •  8’ infeed and 8’ outfeed with fence, legs, (2)gravity flip stops   
  •  16’ infeed and 16’ outfeed with fence, legs (4) sets, (2) gravity flip stops  
  •  Custom infeed/outfeed rollers up to 40’           
  •  18″ x 80T carbide-tipped blade  
  •  18” x 100T carbide-tipped blade           
  •  18” x 120T carbide-tipped blade  
  •  (1) Gravity flip stop  
  •  460V  3-phase power                  
  •  Safety interlock for blade access   
  •  Rigid stop   

Specifications

  • Main Motor Hp. = 10 hp.
  • Voltage/ Freq. = 230 Volt 60Hz
  • Phase = 3 Phase
  • Amp Requirement = 24 Amps
  • Electronics = CE Approved Components
  • Dual Voltage = 230/460 Volt
  • Control Voltage = 24 Volt Control Voltage
  • Cut Envelope = 1” x 13” 2” x 12” 4” x
  • Min. Length = 14” from Blade to Gaurd Edge
  • Max. Width = 1” x 13”
  • Max. Thickness = 5”
  • Arbor Rpm = 3600 Rpm
  • Blade Size = 18” Tungsten Carbide-Tipped
  • No. of Teeth = 120 Tooth
  • Tooth Spacing = 15/32 In.
  • Blade Kerf = .135 In.
  • Dust Collection = 4” 450 CFM
  • Dust Port Out = 4” Bottom
  • Arbor Diameter = 1”
  • Cycles/Minute = 45 Cuts Per Minute
  • Hold Down Style = T Clamp
  • FLR Included = Filter, Lubricator, Regulator
  • Recommended CFM = 480 nl/min
  • Emergency Stop = Push Button
  • Safety Feature = Safety Interlock Switch
  • Guarding = High Visibility Guarding
  • Operation Style = Pneumatic Foot Pedal
  • Fence Type = Adjustable Fence
  • Fence Dims. = 2″ x 25”
  • Adjust. Stroke = 2-3/4” Adj. on Arbor Stroke
  • Frame Const. = 1/4” Steel Construction
  • Worktable Dims. = 26” x 27-1/4”
  • Table Const. = Machined Steel
  • Decible Rating = 78 dB
  • Net Weight = 730 Lbs.
  • Gross Weight = 890 Lbs.
  • Machine Dims. = 26” x 27-1/4” x 49-1/2”
  • Packaging Dims = 40” x 48” x 55”

Additional information

Maximum Blade Diameter

18"

Horsepower

10

Voltage

230V

Power Phase

Three Phase