The CS-12AF cold saw has the capability to cut through solids, tubing, or pipe. The head has a strong 3 HP motor coupled to a direct drive gearbox that allows the blade to cut through the material easily for improved blade life. The CTD CS-12AF cold saw can miter 45 degrees to the left and right with the ability to slot perpendicular to the material as well.
The vise has a taper lock system that helps increase production when repetitive cutting is required. The vise clamps on both sides of the saw head to increase blade life.
The CTD CS-12AF cold saw includes: 2 cold saw blades, horizontal clamps, floor stand, coolant pump with recirculation tank for cooling & washing chips away from the blade to improve blade life.
|Two (2) Blades|
|Coolant Pump with Fluid Holding Tank|
|Ferrous Metal Cold Miter Saw|
|55 / 100 RPM|
|230/460 Volt Three Phase|
|Solid Round at 45°:||3″|
|Square Tube at 45°:||3.5″ x 3.5″|
|Rectangle Tube at 45°:||3.5″ x 2.8″|
|Round Tube at 45°:||4″|
|Solid Round at 90°:||3.5″|
|Square Tube at 90°:||4″ x 4″|
|Rectangle Tube at 90°:||6.3″ x 3.5″|
|Round Tube at 90°:||4.7″|
|Single Action with Cam Lock|
|61″ x 45″ x 50″|
|550 Lbs. (250kg)|