Northtech NT 8-1300RC Dual Head 51″ Wide Belt Sander

NT 8-1300RC Dual Head 51″ Wide Belt Sander

This is a very robust sander. With its larger diameter sanding heads and larger motor, it is capable of powering through material with ease.

Guaranteed Safe Checkout


Northtech NT 8-1300RC 51" Wide Belt Sander
Northtech NT 8-1300RC Dual Head 51″ Wide Belt Sander
Request a call back


Centralized control center with visual load meter and digital elevation control.
Power supply light with emergency stop control.
Individual start/stop controls for feed and sanding head.
Mechanical feed adjustment allows the operator to change desired feed speed from 15-30fpm.
Single 30HP TEFC motor rated for continuous use delivers constant power to sanding surfaces.
Triple V-belt drive for full power delivery to sanding surface.
Disc braking for rapid emergency stops.
Full access door with lock on the outbound side.
Each sanding head has quick-adjust belt tracking on the inbound side.
Strong 4-Jack elevation control for parallel, precise and repeatable sanding quality.
1st Head 8″ 65 Shore Rubber Contact Drum
1/4 Turn head lock with removable puck.
2nd Combination Head with 4″ rubber contact drum with 65/70 Shore Platen.
1/4 Turn head lock with removable puck.
Individual roller and platen adjustment.
Upper and lower elevation protection switches prevent the machine from crashing.
(8) 5″ dust port require 681 CFM @ point of extraction.
Dust port formed into machine body for superb fugitive dust control.
Belt tracking cycle speed is easily adjustable for product-specific oscillation.
All sanding heads are equipped with a quick switch pneumatic belt tensioner.
Single pneumatic hook up with regulator, filter, and master shut off included.
Electronic belt tracking with automatic blow-off cleaner.
Belt monitoring switch shuts down the machine if a belt breaks as well as prevents the head from starting if not activated.
UL/CE certified controls and electrical components are neatly labeled and organized in the electrical cabinet.
All machines are tested stateside prior to shipment providing trouble-free start-up.
Toolbox and manual included.


Max Working Width:
1300mm / 51″
Roller-Combination Head
Number of heads:
* 1st Head:
8″ 65 Shore Rubber Contact Drum
* 2nd Head:
Combination Head With 4″ Rubber Contact Drum With 65/70 Shore Platen
Size of Sanding Belt:
51″ x 75″
Mechanical Variable Speed:
Max Working Height:
150mm / 5.9″
Feed Motor:
Table Lifting & Lower Motor:
Dust Collection:
(8) 5″ port:
Voltage / Amperage Requirements:
230V / 460V 60HZ, 3PH:
Machine / Packing Weight:
4,000lbs / 4,650lbs
Packing Dimensions (LxWxH):
65″ x 80″ x 73″