Northtech NT 8-1100RC 43″ Dual Head Wide Belt Sander

NT 8-1100RC 43″ Dual-Head Wide-Belt Sander

This 43-inch dual-head wide-belt sander from Northtech is a very robust machine. A single 30 HP motor powers the 8″ diameter first head and combination second head at a constant speed for consistent results. With feed rates of 16-47 FPM, it will sand efficiently and cost-effectively.

Guaranteed Safe Checkout

Credit

Northtech NT 8-1100RC 43″ Dual Head Wide Belt Sander
Northtech NT 8-1100RC 43″ Dual Head Wide Belt Sander
Request a call back
(*Optional)

Features:

Centralized control center with visual load meter and digital elevation control.
Power supply light with emergency stop control.
Individual start/stop controls for feed and sanding head.
Mechanical feed adjustment allows the operator to change desired feed speed from 16-47.2fpm.
Single 30HP TEFC motor rated for continuous use delivers constant power to sanding surfaces.
Triple V-belt drive for full power delivery to sanding surface.
Disc braking for rapid emergency stops.
Full access door with lock-on outbound side.
Each sanding head has quick-adjust belt tracking on the inbound side.
Strong 4-Jack elevation control for parallel, precise and repeatable sanding quality.
1st Head 8″ 65 Shore Rubber Contact Drum
1/4 Turn head lock with removable puck. * 2nd Combination Head with 4″ rubber contact drum with 65/70 Shore Platen.
1/4 Turn head lock with removable puck.
Individual roller and platen adjustment.
Upper and lower elevation protection switches prevent the machine from crashing.
(8) 5″ dust port require 681 CFM @ point of extraction.
Dust port formed into machine body for superb fugitive dust control.
Belt tracking cycle speed is easily adjustable for product-specific oscillation.
All sanding heads are equipped with a quick switch pneumatic belt tensioner.
Single pneumatic hook up with regulator, filter, and master shut-off included.
Electronic belt tracking with automatic jet blow-off cleaner.
The belt monitoring switch shuts down the machine if a belt breaks as well as prevents the head from starting if not activated.
UL/CE certified controls and electrical components are neatly labeled and organized in the electrical cabinet.
All machines are tested stateside prior to shipment providing trouble-free start-up.
Toolbox and manual included.

Specifications:

Max Working Width: 1100mm / 43″
Configuration: Roller-Combination Head
Number of Heads: 2
* 1st Head: 8″ 65 Shore Rubber Contact Drum
* 2nd Head: Combination Head with 4″ Rubber Contact Drum and 65/70 Shore Platen
Motor: 30HP
Size of Sanding Belt: 43-3/4″ x 75″
Mechanical Variable Speed: 16 – 47.2 FPM
Max Working Height: 150mm / 5.9″
Feed Motor: 2HP
Table Lifting & Lower Motor: 1/4HP
Dust Collection: (8) 5″ port:
*681 CFM Required
Voltage / Amperage Requirements: 230V / 460V 60HZ, 3PH: 79A / 39.5A
Machine / Packing weight: 3,316lbs / 3,826lbs
Machine / Packing dimensions (LxWxH): 60″ x 61″ x 75″ / 63″ x 66″ x 84″
Warranty: One Year Parts