No products in the cart.
Northtech NT 8-1100RC 43″ Dual Head Wide Belt Sander
NT 8-1100RC 43″ Dual-Head Wide-Belt Sander
This 43-inch dual-head wide-belt sander from Northtech is a very robust machine. A single 30 HP motor powers the 8″ diameter first head and combination second head at a constant speed for consistent results. With feed rates of 16-47 FPM, it will sand efficiently and cost-effectively.
For current product availability and our most competitive price delivered, please contact us using the “Request A Quote” button below. Due to vendor restrictions, we cannot always advertise our highly competitive pricing online.
Features: |
| Centralized control center with visual load meter and digital elevation control. |
| Power supply light with emergency stop control. |
| Individual start/stop controls for feed and sanding head. |
| Mechanical feed adjustment allows the operator to change desired feed speed from 16-47.2fpm. |
| Single 30HP TEFC motor rated for continuous use delivers constant power to sanding surfaces. |
| Triple V-belt drive for full power delivery to sanding surface. |
| Disc braking for rapid emergency stops. |
| Full access door with lock-on outbound side. |
| Each sanding head has quick-adjust belt tracking on the inbound side. |
| Strong 4-Jack elevation control for parallel, precise and repeatable sanding quality. |
| 1st Head 8″ 65 Shore Rubber Contact Drum |
| 1/4 Turn head lock with removable puck. * 2nd Combination Head with 4″ rubber contact drum with 65/70 Shore Platen. |
| 1/4 Turn head lock with removable puck. |
| Individual roller and platen adjustment. |
| Upper and lower elevation protection switches prevent the machine from crashing. |
| (8) 5″ dust port require 681 CFM @ point of extraction. |
| Dust port formed into machine body for superb fugitive dust control. |
| Belt tracking cycle speed is easily adjustable for product-specific oscillation. |
| All sanding heads are equipped with a quick switch pneumatic belt tensioner. |
| Single pneumatic hook up with regulator, filter, and master shut-off included. |
| Electronic belt tracking with automatic jet blow-off cleaner. |
| The belt monitoring switch shuts down the machine if a belt breaks as well as prevents the head from starting if not activated. |
| UL/CE certified controls and electrical components are neatly labeled and organized in the electrical cabinet. |
| All machines are tested stateside prior to shipment providing trouble-free start-up. |
| Toolbox and manual included. |
Specifications: | |
| Max Working Width: | 1100mm / 43″ |
| Configuration: | Roller-Combination Head |
| Number of Heads: | 2 |
| * 1st Head: | 8″ 65 Shore Rubber Contact Drum |
| * 2nd Head: | Combination Head with 4″ Rubber Contact Drum and 65/70 Shore Platen |
| Motor: | 30HP |
| Size of Sanding Belt: | 43-3/4″ x 75″ |
| Mechanical Variable Speed: | 16 – 47.2 FPM |
| Max Working Height: | 150mm / 5.9″ |
| Feed Motor: | 2HP |
| Table Lifting & Lower Motor: | 1/4HP |
| Dust Collection: | (8) 5″ port: |
| *681 CFM Required | |
| Voltage / Amperage Requirements: | 230V / 460V 60HZ, 3PH: 79A / 39.5A |
| Machine / Packing weight: | 3,316lbs / 3,826lbs |
| Machine / Packing dimensions (LxWxH): | 60″ x 61″ x 75″ / 63″ x 66″ x 84″ |
| Warranty: | One Year Parts |
