Features:
Blade Guard: |
| Completely Encloses Blade In Rest Position.
The Lower Rotating Blade Guard Pivots Up Into Main Stationary Blade Guard As Saw Heads Pivot Down To Cut. |
Iron Castings: |
| Base & Disc Are Made From Precision Machined Iron Castings For Lasting Accuracy |
| Disc Is Set Flush With Table And Graduated Each Degree |
Spindle & Pivot Shaft: |
| Mounted On Pre-Loaded And Sealed Ball Bearings With 0.001&Quot; Alignment |
Optional Extras: |
| Power Downfeed of Saw Blade, Clamps, Magnetic Starters, Floor Stand, Measuring Fences, and Table Supports |
Specifications:
CTD M25R 12″ Precision Miter Saw
This rugged, accurate heavy duty industrial indexing mitre cut-off saw uses our time tested 200 series sawhead. It will mitre up to 45 degrees each side of 0 degrees, with positive pin stops at 90, 45, 30, 22½, 15, 0.
Standard Features and Specifications:
- Blade Capacity: 12″ OD 305mm standard.
- Spindle & Pivot Shaft: have preloaded, sealed ball bearings; .001 alignment of spindle and pivot.
- Arbor: 1″ 25.4mm OD with 2-1/2″ 64mm saw collars; 3700 RPM.
- Motors: 2 H.P. 1 or 3 Phase totally enclosed fan cooled with manual starter; enclosed 2-belt drive.
- Iron Castings Base & disc: are made from precision machined iron castings for lasting accuracy. Disc is set flush with table and graduated each degree.
- Blade Guard: Completely encloses blade in rest position.Lower rotating blade guard pivots up into main stationary blade guard as saw heads pivot down to cut.
- Actuation: Manual hand operation; optional power feed of saw head.
- Dust Outlet: Two 2″ dust outlet provided. 600 CFM required for each. Optional extras include Power Downfeed of Saw, Clamps, Magnetic Starters, Floor Stand, Measuring Fences, and Table Supports.
- Size & Weights: 22″ 56cm Wide x 27″ 69cm Front to Back x 22-1/2″ 57cm High. Weight 195 lbs.89 kgs.
- Cutting Capacity with fences: Set at center line M25R/45º 2-1/2″64mm High x 3-1/2″89mm Wide M25R/90º 2-1/2″64mm High x 5″127mm Wide
- Maximum Cutting Capacity: M25R/45º 12″ Blade Capacity 305mm 2-5/8″67mm High x 4-1/4″ 108mm Wide
- Maximum Cutting Capacity: M25R/90º 12″ Blade Capacity 305mm 2-1/2″64mm High x 7-1/2″ 191mm Wide
CTD M25RHC 14″ Precision Miter Saw
This rugged, accurate heavy duty industrial indexing mitre cut-off saw uses our time tested 200 series sawhead. It will mitre up to 60 degrees each side of 0 degrees, with positive pin stops at 90º 45º, 30º, 22½º, 15º,0º.
Standard Features and Specifications:
- Blade Capacity: 14″ OD 356mm standard.
- Spindle & Pivot Shaft: Have preloaded, sealed ball bearings; .001 alignment of spindle and pivot.
- Arbor: 1″ 25.4mm OD with 2-1/2″ 64mm saw collars; 3700 RPM.
- Motors: 3 H.P. 3 Phase totally enclosed fan cooled with manual motor starter; enclosed 2-belt drive
- Iron Castings Base & disc: are made from precisionmachined iron castings for lasting accuracy. Disc isset flush with table and graduated each degree.
- Blade Guard: Completely encloses blade in rest position.Lower rotating blade guard pivots up into main stationary blade guard as saw heads pivot down to cut.
- Actuation: Manual hand operation or optional power feed of saw head with two hand control unit
- Dust Outlet: Two 2″ dust outlet provided. 600 CFM required for each.
- Cutting Capacity with fences: Set at center line45° Mitre Maximum Cutting Capacity 5″ 127mm High x 5″ 127mm Wide. 90° Straight Maximum Cutting Capacity 5″ 127mm High x 6.625″ 168mm Wide.
- Maximum Cutting Capacity: 45º Mitre Maximum Cutting Capacity 5″ 127 mm High x 7.5″ 190mm Wide. 90° Straight Maximum Cutting Capacity 5″ 127 mm High x 9″ 229mm Wide.
Options:
| Part# | Description | Price | ||
| AF | Air power feed unit. For precision, controlled cutting on | $3,195 | ||
| wood, plastic or non-ferrous sections. Air valves are | ||||
| mounted above saw head and reverse when two-hand | ||||
| control is released; includes one air clamp, air filter | ||||
| foot valve to actuate clamp, & pneu. timer & pressure gauge . | ||||
| LEFT | Left Hand Assembly Option | $295 | ||
| AG | Air Gun | $130 | ||
| HYD | Same as AF but uses a Hydrocheck Unit with air cylinder for | $3,995 | ||
| controlled downstroke speed. | ||||
| B3P153E | Skip Check for quick cycling of saw head using HYD until you start | $815 | ||
| cutting thru your parts (New machine install only) | ||||
| AV/200 | Automatic Valve. Valve actuator, used if item VC3, HC or SLS | $175 | ||
| is purchased without AF/HYD. | ||||
| VC/200 | Vertical air clamp (one side – please specify) | $325 | ||
| HC/200 | Horizontal air clamp (one side – please specify) | $350 | ||
| PR | Pressure regulator | $160 | ||
| SLS/200 | Saw Blade lubrication system. Includes container, vacuum | $495 | ||
| Pump, nozzle, check valve and fittings. | ||||
| BIOL/200 | CTD biolube Lubrication System. Uses pulse system to | $1,795 | ||
| lubricate blades. System uses a minimum amount of high | ||||
| grade biodegradable oil per cycle. | ||||
| B3P141 | CTD biolube lubricant, per gallon | $95 | ||
| 10P01 | CTD Soluble oil, per gallon | $40 | ||
| 575 volt available – call for pricing | 50Hz motor available – call for pricing | |||
