2020 Viet Opera 5 (4) Head 53″ Calibrating Sander (89 Hours)

This 2020 Viet Opera 5-4.3 RRRR, 53″ wide calibrating sander has a total of 1,982 power on hours and ONLY 89 run (conveyor) hours. This is a very loaded, LOW HOUR machine! This Opera does have a constant pass line with a 53″ width capacity and a 200 mm or 7.87″ thickness capacity. Right above the infeed of the machine you will find inspection LED lighting, along with a digital thickness calibration unit, and a wireless Mitutoyo Digimatic Caliper that does communicate with the Opera’s operating system. The first head is a 9″ helical grooved steel drum powered by a 22 kw or 29.5 hp motor. The second head is a VARIABLE SPEED (via VFD) 9″ helical grooved rubber drum powered by a 18.5 kw or 25 hp motor. The third head is a VARIABLE SPEED (via VFD) 11″ helical grooved rubber drum powered by a 15 kw or 20 hp motor. The forth head is a VARIABLE SPEED (via VFD) 11″ helical grooved rubber drum powered by a 15 kw or 20 hp motor. The durometer does get softer from head 2 to 3 and then from head 3 to 4. Each head is scaled and easily adjustable. Up top you will find air wands on each head and additionally there is an air wand that cleans the vacuum feed mat as well. The vacuum bed is powered by a 11 kw or 15 hp blower that is located under the sander to save space. The feedmat is powered by a 5.5 kw or 7.5 hp motor with variable speed via a VFD with feed speeds from 9.8 to 52.4 FPM. Upon exiting the machine you will find a dust brush powered by a 1.27 kw or 1.7 hp motor. Inside you will find interior led lighting while all the controls on this Opera are up front via a touch screen.

This fully functional machine has been fully cleaned, checked, and is ready to work from the time you receive it. This is our guarantee to both you and your company.