Features:
| Motor: | 5hp 1 phase, 220 Volt, 60 Hz |
| Spindle Tilt: | 45° Backwards, 10° Forward |
| Sliding Table: | 10-1/4″ X 39″ |
| Sliding Table Stroke: | 18-3/4″ |
| Main Table Incl. S/T: | 39-1/2″ X 31-5/8″ |
| Tenoning Table: | 13-3/4″ X 18-1/2″ |
Specifications:
| The versatile 45° backward & 10° forward tilting spindle makes using a feeder much easier & keeps the cutting action close to the cast table rather than shaping from the top. Oversized cast table pre-drilled to accept most feeders & featuring a sliding table with tenoning as standard. Complete with table & hold down clamp. The sliding table has a full 30” stroke from miter fence to the center of the spindle. Miter gauge adjusts +/- 45° The interchangeable spindle comes standard as 1-¼″, but other sizes including router collets are available. The fence is made from heavy cast iron & easily adjusts w micro-adjusters for both in/outfeed. LED lights display the desired RPM. The S45T is available in both 1 phase & 3 phase. Other voltages are also available upon request. | |
| Hold Down Clamp: | Included |
| Tenoning Table Adjustment: | 7″ Slide To Spindle |
| Sliding Table Stroke: | 19″ Right of Spindle |
| Sliding Table Stroke: | 19″ Left of Spindle |
| Sliding Table Far Right: | 30″ Spindle To Miter Gauge |
| Table Height: | 35-⅜″ |
| Capacity Under Nut: | 5″/125mm |
| Spindle Stroke: | 7″/180mm |
| Spindle: | 1-¼″ Interchangeable |
| Max Tooling Diameter: | 8-¼″/210mm Under Table |
| Max Tooling Diameter: | 13″/335mm Above Table |
| Rotation: | Forward/Reverse |
| Fence: | Micro Adjust, Cast Body |
| Speeds: | 3000/4000/6000/8000/10000 RPM |
| Readout: | LED Lights For Speeds |
| Readout: | Mechanical Tilt & Spindle Height |
| Feeder: | Pre-drilled Left Back Corner |
| Router Collet: | Accepts, Not Included |
| CAS Components | |
| Weight (Net/Ship): | 1056/1350 lbs |
| Shipping Dimensions (L x W x H): | 49″ x 45″ x 50″ |
