NT SLR-16SC PRECISION STRAIGHT LINE RIP SAW
FEED SYSTEM
- Saw motor: 15HP, 3PH 230/460V
- Feed: 1.5HP variable from 40′ – 120′ FPM
PRODUCT DIMENSIONS
- Min. thickness: 3/16″
- Max depth of cut: 4-1/16″ with 16” Blade
- Max depth of cut: 3-1/16” with 14” Blade
- Max. width of stock: (Blade to column arms) 18-1/4″
FEATURES
- “True Track” Chain and Race
- Table size 69” x 35”
- The machine frame is constructed of a 1″ thick base plate
- Solid steel frame with 1/2″ thick column arms.
- Safety door switch with pneumatic motor brake.
- 2″ arbor and large support bearings.
- Glue line guarantee 12′ on 4/4 at 50 FPM
- All motors and electricals are UL-rated.
- Industrial fence with cam-lock quick release on rack and pinion glide.
- Two rows of heavy-duty kickback fingers.
- (8) large pressure rollers for optimum glue line ripping.
- An automatic mechanical oiling system with low oil level feed shutoff.
- A 100mw laser light and mounting bracket are included.
- (1) Toolbox
- Amperage requirements: 15HP + 1.5HP 230V / 460V: 39.7A / 19.85A.
- Dust requirements:
- (1) 4″ dust port requiring 450 CFM
- (1) 6″ dust port requiring 981 CFM
- Weight: 2,285 lbs.
- Machine dimensions: (L) 77″ x (W) 57″ x (H) 66″
- Warranty is one-year parts
- All machines are tested stateside at the factory before shipment providing trouble-free start-up.
SPECIFICATIONS:
- Main Motor Hp. = 15 hp.
- Direct Drive = Direct Drive
- Voltage/ Freq. = 230/460 Volt 60Hz
- Phase = 3 Phase
- Amp Requirement = 40/20 Amps
- Feed Hp. = 1.5 Hp.
- Feed System = 4” Split Chain with True Trac
- Drive System = Belt
- Feed Speed = 40-120 FPM
- Variable Speed = Mechanical
- Elevation Style = Manual Wheel Adjustment
- Elevation Sys. = Linear Gauge with Hand Wheel
- Total Hp. = 16.5 Hp.
- Electronics = CE Approved Components
- Dual Voltage = 230/460 Volt
- Control Voltage = 110 Volt
- Assisted Start = Wye Delta
- Pass-Line = 33-3/8”
- Throat Capacity = 18-1/4”
- Min. Length = 12” 2nd Roller to Kickback
- Max. Length = Infinite
- Min. Width = 1″
- Min. Thickness = 3/16″
- Max. Thickness = 4-1/16” W/ 16” Blade
- Glue Line Rip = Guaranteed 12′ 4/4 stock @ 50 FPM
- Arbor Rpm = 3520 RPM
- Blade Size = 14” Tungsten Carbide Tipped
- No. of Teeth = 70 Tooth
- Tooth Spacing = 5/8 In.
- Blade Kerf = .197 In.
- Vertical Travel = 3/16” – 3-3/8”
- Dust Collection = 1417 Total CFM
- Dust Port Out = 4” Top 6” Bottom
- Arbor Diameter = 2″ Arbor
- Idle Rollers = (8) Idle Rollers
- Hold Down Style = 8 Spring Loaded Hold Downs
- Kickback Finger = (59) Lower (32) Top
- Emergency Stop = Push Button
- Rear E Stop = Push Button
- Safety Feature = Door Switch / Motor Brake
- Guarding = High Visibility Guarding
- Oiler = Automatic Mechanical Oiler
- Low Oil Warning = Low Oil Shut-off
- Fence Type = Industrial Cam Lock Quick Rel
- Fence Dims. = 1-3/4” x 23-3/4”
- Brake System = Air Brake on Motor
- Frame Const. = 1” Base 1/4” Frame 3/4” Arms
- Worktable Dims. = 69” x 35”
- Table Const. = Steel
- Laser = 100mw Laser Light & Mount Bracket
- Decible Rating = 84 dB
- Net Weight = 2170 Lbs.
- Gross Weight = 2285 Lbs.
- Machine Dims. = 77” x 57” x 66”
- Packaging Dims = 81” x 58” x 74”
