Features:
| Pre-Mill |
| Corner Rounding |
| Dual Motor End Time |
| Top & Bottom Trim |
| Buffing & Scraping |
Specifications:
| Model: | MED52203 |
| Feed Speed: | 15-23m/min(49-76ft/min) |
| Edge Thickness: | 0.4-3mm (1/64″ – 1/8″) |
| Panel Thickness: | 10-60mm |
| Panel Length: | >150mm |
| Working Pressure: | 0.6mpa |
| Power Requirements: | 220V-3PH-60HZ |
| Total Power: | 16.45kW (22HP) |
| Panel Width: | >60mm |
| Dust Port Outer Diameter: | 98mm (3.85″) x 5 |
| CFM Requirement: | 2000 CFM |
| Minimum Panel Size (L x W): | 300mm x 60mm (11-13/16″ x 2-3/8″) / |
| 150mm x 150mm (5-29/32″ x 5-29/32″) |
