Spindle Arrangement
- 1st: Bottom horizontal: 15HP, 6,000 RPM, 40mm spindle
- 2nd: Right vertical: 10HP, 6,000 RPM, 40mm spindle
- 3rd: Left vertical: 10HP, 6,000 RPM, 40mm spindle
- 4th: Top horizontal: 15HP, 6,000 RPM, 40mm spindle
- 5th: Top horizontal: 15HP, 6,000 RPM, 40mm spindle
- 6th: Bottom horizontal: 15HP, 6,000 RPM, 40mm spindle
Feed System
- Feeding motor: 7-1/2 HP with inverter
- Elevation motor: 1/2 HP
- Feeding speed: 20 – 120 FPM
Product Dimensions
- Width: 10mm – 230mm (3/8″ – 9-1/2″)
- Thickness: 8mm – 170mm (5/16″ – 6-1/2″)
- Minimum length: 300mm (12″)
Features:
- Infeed table length: 1300mm (51″)
- Table is hard chrome plated
- (3) Powered bed rollers
- (1) Auxiliary short stock roller
- (1 set) Moulder heads
- Horizontal: (4) 5″ x 9″; 4 wing, 40mm heads
- Vertical: (2) 5″ x 4″; 4 wing, 40mm heads
- Dust collection: (6) 125mm (5″) dust ports requiring 681 CFM @ each point of extraction
- Net weight: 9,039 lbs.
- Gross weight: 10,362 lbs.
- Machine dimensions: (L) 150″ x (W) 83″ x (H) 84″
- Packing dimensions: (L) 168″ x (W) 76″ x (H) 71″
- (1) Toolbox
- Warranty is one-year parts
- All machines are tested at the factory prior to shipment providing trouble-free start-up.
Specifications:
- Reverse Motor = Feed Motor
- Machine Hp. = 88 Hp.
- Voltage/ Freq. = 230/460 Volt 60Hz
- Phase = 3 Phase
- Amp Requirement = 210/105 Amps
- Spindle Arrangement = Bottom Right Left Top Top Bottom
- 1st Spindle = 15HP, 6,000 RPM, 40mm spindle
- 2nd Spindle =10HP, 6,000 RPM, 40mm spindle
- 3rd Spindle = 10HP, 6,000 RPM, 40mm spindle
- 4th Spindle = 15HP, 6,000 RPM, 40mm spindle
- 5th Spindle = 15HP, 6,000 RPM, 40mm spindle
- 6th Spindle = 15HP, 6,000 RPM, 40mm spindle
- Spindle Diam. = 40 mm
- Spindle RPM = 6000 Rpm
- Under Nut Cap. = Horiz. 9-7/8” Vert. 7”
- Feed Hp. = 7.5 Hp.
- Feed System = Synchronized gearbox feed sys
- Drive System = Inverter-controlled 7.5HP feed
- Feed Speed = 20 – 120 FPM
- Variable Speed = Inverter Controlled
- Elevation Hp. = 1/2 Hp.
- Elevation Style = Up/Down Switch
- Elevation Sys. = Jack Screw / Gib System
- Total Hp. = 88 Hp.
- Electronics = UL Approved Components
- Dual Voltage = 230/460 Volt
- Control Voltage = 220V Control Voltage
- Assisted Start = Wye-Delta 15 Hp Heads
- Pass-Line = 35-1/2”
- Min. Length = 12”
- Min. Width = 3/8”
- Max. Width = 9-1/2”
- Min. Thickness = 5/16”
- Max. Thickness = 6-1/2”
- Roller Type = Steel / Rubber
- Dust Collection = (6) 5” @ 5886 CFM
- Digital Display = Feed
- Powered Rollers = 9 Top 3 Bottom Powered Rollers
- Pressure Shoes = (2) 7-1/8” x 8-3/4”
- Hold Down Style = Pressure Shoes/Rubber Rollers
- Emergency Stop = (2) Push Button
- Guarding = Full Cabinet Enclosure
- Grease Manifold = Remote Grease Manifold
- Oiler = Auto Oiler
- Fence Type = Adjustable Fence
- Fence Dims. = 1” x 53-1/4”
- Brake System = Air Brakes On Motors
- Frame Const. = Cast/Steel Construction
- Worktable Dims. = 10-7/8” x 136”
- Chrome Bed = .004” Chrome Plated Bed
- Noise Bed Fing. = Noise Reduction
- Measure Meth. = Siko Counter
- Decible Rating = 76 dB
- Net Weight = 9039 Lbs.
- Gross Weight = 10800 Lbs.
- Machine Dims. = 158” x 75” x 71”
- Packaging Dims = 163” x 83” x 84”
