Name: 2016 Format 4 kappa 400 Sliding Table Panel Saw (X-Motion) 3200mm Carriage
Availability: InStock

The rip fence is positioned by a motor and runs via a dust-free integrated ball spindle in the saw table. With an accuracy of .004” (.1 mm), the rapid and simultaneous positioning of the rip fence, saw blade height and cutting angle ensure precision, increased productivity and higher profits.

Automatic measurement correction when the rip fence is horizontal
Rip fence park position
No collision possible with the saw blade due to the coordination of the tool database by the positioning control
The rip fence can be swung away at any point across the full rip capacity

The integrated guide rollers of the outrigger table ensure an incredibly smooth operation upon maximum load capacity. The bearing rail is moved along a “X-Roll” guide and is fast and micro-adjustable. The LED display enables you to set the required angle to one tenth of a degree.

Push button control “ON” switch of the main blade and scoring blade to the sliding table, speeding up the work process further.

Electronic height adjustment with LED display
Electronic angle adjustment with digital LED display
Tilting of saw-blade 90°-45°
Oversized saw arbor with double trunnions
Maximum motor power transfer from the Poly-V belt
3-speed: 3500/4500/5500 rpm
Optimal dust extraction with the completely enclosed, below table extraction system
Dovetail guidance system for height adjustment
A highly robust synthetic material located in the guidance track of the tilting brackets, ensures they run smoothly and maintenance free even under the most extreme conditions. The tilt guide segment runs without lubrication and is insensitive to dust.

Extremely smooth and precise sliding action! With the roller-bearing system there is no single point of contact between bearings and guiding track, maximizing precision over the lifetime of the machine.
Clean, dust-free guide rails obtained by special wipers and brushes.
Smooth movement of the sliding table ensured by hardened steel, ground-bearing tracks.

Cutting length: 125″ (3200 mm) (table stroke)
“X-Roll” sliding table, 10 year guarantee
Cutting width: 49.215 (1250 mm) (fence travel)
Cutting height: 5¼” (133 mm)
Control system: x-motion
9×99 program spaces + cutting sequences
Electronic height adjustment with LED display
Electronic angle adjustment with digital LED display
Tilting of saw-blade 90°-45°
Oversized saw arbor with double trunnions
Maximum motor power transfer from the Poly-V belt
3-speed: 3500/4500/5500 rpm
Optimal dust extraction with the completely enclosed, below table extraction system
Dovetail guidance system for height adjustment
A highly robust synthetic material located in the guidance track of the tilting brackets, ensures they run smoothly and maintenance free even under the most extreme conditions. The tilt guide segment runs without lubrication and is insensitive to dust.
Precise double trunnion system
High load-bearing capacity and operating life
Play free tilt
Unaffected by dust
Completely maintenance free
No lubrication required
Tilting of saw-blade 0°-45°
5” (133 mm) of cutting height at 90 degrees
4” (94 mm) of cutting height at 45 degrees
The kappa 400 has dado capability. Used with the massive specially designed Format4 dado cutter head clean, precise dado cuts from 1/4”–3/4” (6–20 mm) are guaranteed.
The vertical and horizontal position of the scoring blade in relation to the main blade can easily be set from the control panel
The scoring blade setting information can be stored in the tooling database for the main sawblade used. When the same main sawblade is used again the scoring blade will reposition itself for that particular blade.