Model: 3000 Series
Electrical: 220v, 3ph, 62.5amps, 50/60hz.
Total table dimensions: 50” x 50”
The right head has a servo motor for the Y-Axis while the left head is slaved to the right head via an adjustable bar. The left head can be un-attached and moved to the left if needed.
5.5kW / 7.5hp Colombo Spindles
10-3/4” of Z-Axis Travel (w/no tooling BUT including spoil board)
Approximate max working area for each spindle: 30” X-Axis and 50” Y-Axis if using both spindles. 50” X-Axis and 50” if you change parameters and use one spindle
13-26″ adjustability between head centers
Each spindle has independent Z-Axis controls
Equipped with a handheld KDM20G controller
Control panel is built-into rear of machine base
10 HP Multicam Vacuum Pump
2012 Multicam 3000 Series Twin Head/Spindle CNC Router (50″ Table)
This is an interesting Multicam 3000 Series CNC router in that it has twin 7.5 hp spindles. The right head has a servo motor for the Y-Axis while the left head is slaved to the right head via an adjustable bar (13-26″ adjustability between head centers). The left head can be un-attached and moved to the left, out of the way if needed. Changing the “Y” axis offset in the programming will allow you to have a single head that can travel over the full 50″ X 50″ vacuum table. Likewise you can run the heads together and duplicate 2 pieces at once with a little less “Y” axis travel. Includes 10 hp vacuum pump.
This fully functional machine has been fully cleaned, checked, and is ready to work from the time you receive it. This is our guarantee to both you and your company. It is owned by 360 Degree Machinery and located in our inventory in Kingston, TN.