Features:
Blade Guard: |
| Completely Encloses Blade In Rest Position |
| Lower Rotating Blade Guard Pivots Up Into Main Stationary Blade Guard As Saw Heads Pivot Down To Cut |
Table Base: |
| Made Of Iron Castings, Precision Machined And Ground With Milled Slots To Guide Fences |
| Sawhead Is Fixed At 90° |
| Fence Brackets Are Fit To Milled Keyways In Base And Are Easily Adjustable Front To Rear |
Spindle & Pivot Shaft: |
| Mounted On Pre-Loaded And Sealed Ball Bearings With 0.001&Quot; Alignment |
Optional Extras: |
| Power Downfeed Of Saw Blade, Clamps, Magnetic Starters, Floor Stand, Measuring Fences, And Table Supports |
Specifications:
Saw Type: | 14″ Straight Cutoff saw |
Blade Capacity: | 14″ |
Arbor: | 1″ (25.4mm) with 2-1/2″ (64mm) Saw Collars. |
Motor HP: | |
| Single Phase: | 2 HP |
| Three Phase: | 3 HP |
Motor Voltage: | |
| Single Phase: | 115/230 Volt |
| Three Phase: | 230/460 Volt |
Motor Speed: | 3450 RPM |
Maximum Cutting Capacity: | |
| 90°: | 4-1/2” (114mm) High x 9” (228mm) |
Actuation | Manual Hand Operation |
| *Optional Power Downfeed Available | |
Dust Collection: | Dual 2″ Dust Outlets |
| *600 CFM Required For Each | |
Machine Dimension: | 22″ (56cm) Wide x 27″ (69cm) Front to Back x 22-1/2″ (57cm) High |
Machine Weight: | 150 Lbs. (68kg) |
Options:
| Part# | Description | Price | ||
| AF | Air power feed unit. For precision, controlled cutting on | $3,195 | ||
| wood, plastic or non-ferrous sections. Air valves are | ||||
| mounted above saw head and reverse when two-hand | ||||
| control is released; includes one air clamp, air filter | ||||
| foot valve to actuate clamp, & pneu. timer & pressure gauge . | ||||
| LEFT | Left Hand Assembly Option | $295 | ||
| AG | Air Gun | $130 | ||
| HYD | Same as AF but uses a Hydrocheck Unit with air cylinder for | $3,995 | ||
| controlled downstroke speed. | ||||
| B3P153E | Skip Check for quick cycling of saw head using HYD until you start | $815 | ||
| cutting thru your parts (New machine install only) | ||||
| AV/200 | Automatic Valve. Valve actuator, used if item VC3, HC or SLS | $175 | ||
| is purchased without AF/HYD. | ||||
| VC/200 | Vertical air clamp (one side – please specify) | $325 | ||
| HC/200 | Horizontal air clamp (one side – please specify) | $350 | ||
| PR | Pressure regulator | $160 | ||
| SLS/200 | Saw Blade lubrication system. Includes container, vacuum | $495 | ||
| Pump, nozzle, check valve and fittings. | ||||
| BIOL/200 | CTD biolube Lubrication System. Uses pulse system to | $1,795 | ||
| lubricate blades. System uses a minimum amount of high | ||||
| grade biodegradable oil per cycle. | ||||
| B3P141 | CTD biolube lubricant, per gallon | $95 | ||
| 10P01 | CTD Soluble oil, per gallon | $40 | ||
| 575 volt available – call for pricing | 50Hz motor available – call for pricing | |||
