Features:
Blade Wear & Angular Adjustments: |
| Each saw head has adjustments for blade variation. Allows for precision alignment of blades to minimize scrap. Saw heads are adjustable up to 3°, always assuring perfect miters. |
Length of Stroke Adjustment: |
| The D45AX14 is unique in that the stroke of the machine and the position of the blade above the work can be adjusted to use only the stroke needed to cut a particular moulding or extrusion. Saw heads reverse immediately, thereby saving wasted time and motion. |
Production Rate: |
| The D45AX14 is capable of cycling at one-second intervals. However, actual production rates vary with the type and width of material to be cut. |
Floor Stand: |
| Close-coupled heavy gauge steel stand completely enclosed with 6″ dust outlet. 1200 CFM required. |
Spindle & Pivot: |
| Both mounted on preloaded and sealed ball bearings. |
Specifications:
Saw Type: | Fixed double miter |
Blade Capacity: | 14″ |
Arbor: | 5/8″ (16mm) with 2-1/4″ (57mm) Saw Collars. |
Motor HP: | 2HP |
Motor Voltage: | |
| Single Phase: | 115/230 Volt |
| Three Phase: | 230/460 Volt |
Motor Speed: | 3450 RPM |
Starter: | Magnetic Starter |
Cutting Capacity: | 4″ H x 2.5″ W or 2″ H x 6″ W |
Table Height: | 34-1/2″ (88cm) From Floor |
Actuation | Pneumatic Foot Valve with Cover |
Air Pressure Requirement: | 75 psi (5.4 kg/㎠) |
Air Consumption: | 1.0 CF/10 strokes @ 75 PSI (0.043 ㎥/min @ 5.4 kg/㎠ |
Dust Collection: | 6″ Dust Outlet |
| 1200 CFM Required | |
Machine Dimensions (w/o Tables or Gages): | 46″ (117cm) Wide x 22″ (56cm) Front To Back x 51-1/2″ (131cm) High |
Machine Weight: | 550 Lbs. (250kg) |
Crated Size: | 45″ (114cm) Wide x 28-1/2″ (72cm) Front To Back x 60″ (152cm) High |
Options:
| Table | ||||
| Part# | Description | Price | ||
| T72 | 6′ Extended table work support. 12″ wide x 72″ long | $575 | ||
| T60HD | 5′ Heavy duty table work support. 15″ W x 60″ L made | $675 | ||
| with heavy gage steel | ||||
| RC-5 | 5′ Roller conveyor. Included: One leg and 3 steel rollers {$25.00 each PVC} | $650 | ||
| T60RT | 60″ Roller table for mounting electronic gage (10 rollers) {$15.00 each PVC} | $1,075 | ||
RC-5 T72
| Fence Length Gage | ||||
| Part# | Description | Price | ||
| FEX | Front extended fence gage. 5/8″ x 2″ fence with measuring | |||
| tape stop and clamp; measures outside miter dimension. | ||||
| 6′ long measures 68″ | $475 | |||
| 10′ long measures 116″ | $575 | |||
| 12′ long measures 140″ | $645 | |||
| REX | Rear extended fence gage. Same as item Fex but reversed. | |||
| 6′ long measures 68″ | $525 | |||
| 10′ long measures 116″ | $625 | |||
| 12′ long measures 140″ | $675 | |||
| FLP-D45 | Production flip stop. (add to FEX / REX) | $195 | ||
| ASTP | Air Stop. Push the button to move stop to desired dimension, | $450 | ||
| release the button and stop locks. | ||||
| THC | Two hand control saw blade operation | $935 | ||
| DIG/EXF | Digital length measurement fence. Item EXF with digital | |||
| measuring scale and display. | ||||
| 6′ length | $2,795 | |||
| 10′ length | $3,495 | |||
Measuring Gages | ||||
| Part# | Description | Price | ||
| VIS | VISION GAGE SS: For measuring inside, rabbet or outside | |||
| dimension of moulding. Lines are etched and painted at 45 | ||||
| degrees to front fence in 3 different colors in 1/8″ increments. | ||||
| SS gage is made for right hand mounting only and is 6″ wide. | ||||
| 6′ Long | $2,995 | |||
| 10′ long | $3,995 | |||
| Optional Accessories | ||||
| Part# | Description | Price | ||
| 3H3 | 3 HP 3 Phase 230/460 volt motor for D45AX, D45AX14, or N80 | $625 | ||
| 5H3 | 5 HP 3 Phase 230/460 volt motor for N90 | $725 | ||
| 575V | 575 volt motor for machine | $2,400 | ||
| 50C | 50Hz motors, 2950 RPM for models | D45AX | $350 | |
| N80/N90 | $550 | |||
| AG | Air Gun | $130 | ||
| HYD | Hydrocheck unit provides smoother slow-speed action | $1,625 | ||
| when cutting heavy extrusions or hardwoods. D45AX only | ||||
| B3P153E | Skip Check for quick cycling of saw head using HYD until you start | $895 | ||
| cutting thru your parts (New machine install only) | ||||
| VC3 | Vertical air clamp (one side – please specify) | $325 | ||
| HC3 | Horizontal air clamp (one side – please specify) | $350 | ||
| PR | Pressure regulator | $160 | ||
| FMF | Front mitering fence. To convert staggered blade notching | $395 | ||
| machines to mitering machine. Must add length gage. | $495 | |||
| REV/FHC | Special front mount horizontal clamp(2) with reverse fence. | $1,095 | ||
| SLS | Saw blade lubrication system for use in cutting aluminum. | $625 | ||
| BIOL/45 | CTD double nozzle biolube lubrication system. Uses a pump | $2,250 | ||
| to lubricate blade. System uses minute amount of biodegradable oil. | ||||
| B3P141 | CTD biolube lubricant, per gallon | $95 | ||
| 10P01 | CTD Soluble oil, per gallon | $40 | ||
