Features:
Centralized control center with visual load meter and digital elevation control. |
Power supply light with emergency stop control. |
Individual start/stop controls for feed and sanding head. |
Mechanical feed adjustment allows the operator to change desired feed speed from 15-30fpm. |
Single 30HP TEFC motor rated for continuous use delivers constant power to sanding surfaces. |
Triple V-belt drive for full power delivery to sanding surface. |
Disc braking for rapid emergency stops. |
Full access door with lock on the outbound side. |
Each sanding head has quick-adjust belt tracking on the inbound side. |
Strong 4-Jack elevation control for parallel, precise and repeatable sanding quality. |
1st Head 8″ 65 Shore Rubber Contact Drum |
1/4 Turn head lock with removable puck. |
2nd Combination Head with 4″ rubber contact drum with 65/70 Shore Platen. |
1/4 Turn head lock with removable puck. |
Individual roller and platen adjustment. |
Upper and lower elevation protection switches prevent the machine from crashing. |
(8) 5″ dust port require 681 CFM @ point of extraction. |
Dust port formed into machine body for superb fugitive dust control. |
Belt tracking cycle speed is easily adjustable for product-specific oscillation. |
All sanding heads are equipped with a quick switch pneumatic belt tensioner. |
Single pneumatic hook up with regulator, filter, and master shut off included. |
Electronic belt tracking with automatic blow-off cleaner. |
Belt monitoring switch shuts down the machine if a belt breaks as well as prevents the head from starting if not activated. |
UL/CE certified controls and electrical components are neatly labeled and organized in the electrical cabinet. |
All machines are tested stateside prior to shipment providing trouble-free start-up. |
Toolbox and manual included. |
Specifications:
Max Working Width: | 1300mm / 51″ |
Configuration: | Roller-Combination Head |
Number of heads: | 2 |
* 1st Head: | 8″ 65 Shore Rubber Contact Drum |
* 2nd Head: | Combination Head With 4″ Rubber Contact Drum With 65/70 Shore Platen |
Motor: | 30HP |
Size of Sanding Belt: | 51″ x 75″ |
Mechanical Variable Speed: | 15-30fpm |
Max Working Height: | 150mm / 5.9″ |
Feed Motor: | 1HP |
Table Lifting & Lower Motor: | 1/4HP |
Dust Collection: | (8) 5″ port: |
Voltage / Amperage Requirements: | 230V / 460V 60HZ, 3PH: |
Machine / Packing Weight: | 4,000lbs / 4,650lbs |
Packing Dimensions (LxWxH): | 65″ x 80″ x 73″ |