Applications:
- Raw Wood Sanding | White Wood Sanding
- Break sharp edges
- Open grain for even finish absorption
- Blend out minor defects
- Sealer Sanding | Primer Sanding | Scuff Sanding
- Removes raised fibers and grain (denib/defuzz)
- Degloss previously finished wood
- Clean reclaimed wood
- Wire Brushing
- Distress (weathered/Southwest finish)
- Pull out soft grain to create a textured surface
Features:
- Infinitely variable brush speed and conveyor feed rate
- Optional Drum for surface sanding
- Quickly change brush heads or abrasive loadings
- Fully adjustable tension rollers prevent stock slippage
- Reinforced steel conveyor bed with a poly conveyor belt
- Precision height adjustment
- Bristle Contact Gauge included
Specifications:
Maximum Sanding Width: | 13″ |
Minimum Sanding Length: | 9″ |
Maximum Sanding Thickness: | 4″, varies with drum/brush style |
Top Filter Bag Length: | 1 Micron Cloth – 32” |
Minimum Sanding Thickness: | 1/32″ |
Dimensions: | 35″ D x 42″ W x 44″ H |
Drum: | 5 x 13 Extruded Aluminum |
Brush: | 6-8 Typical Diameter |
Speed: | Infinitely Variable 400-1200 RPM |
Dust Hood: | 1 – 4″ vacuum port, hinged at back (min. 600CFM recommended) |
Speed: | Infinitely Variable 400-1200 RPM |
Dust Hood: | 1 – 4″ vacuum port, hinged at back (min. 600CFM recommended) |
Conveyor Motor: | 43″ -lb. torque, direct drive D.C. motor, ranged variable 0-10 FPM |
Drive Motor (TEFC): | 1-3/4HP |
Power Requirements: | 110V, 15 Amp, 20 Amp Service |
Shipping Weight: | 300 (approx., varies based on how equipped) |