---
title: "Northtech NT-UCS24 (24″) 15HP Upcut Saw (Right or Left) 230/460V"
description: "This innovative up-cut saw from Northtech quickly and safely cut boards up to 21 inches wide or 8 inches high. The powerful 15 HP motor and 24″ diameter blade reliably produce clean and consistent results. Up to 16′ infeed/outfeed tables with flip-stops are optionally available to further improve operator speed and accuracy.  * “UCS” up-cut saw models, offer advanced features such as extra dust collection and a full zero-clearance fence to help eliminate tear-out!"
url: https://360degreemachinery.com/product/northtech-nt-cs24r-1534-24-15hp-up-cut-saw-right-hand-cut-460v/
date: 2021-02-01
modified: 2025-03-26
author: "Dave Ratliff"
image: https://360degreemachinery.com/wp-content/uploads/2021/02/northtech-nt-ucs24-24-15hp-upcut-saw-right-or-left-230-460v.jpg
type: product
lang: en
---

# Northtech NT-UCS24 (24″) 15HP Upcut Saw (Right or Left) 230/460V

**PRODUCT DIMENSIONS**

- Max cutting capacity: 2″ x 21″, 4″ x 19″, 6″ x 15″, 8″ x 8″

** **

**FEATURES**

- 15HP motor, 3PH 230V with 24V magnetic controls

- 24” Carbide tipped blade included

- 1” Saw arbor diameter

- Cycle operation: Pneumatic

- Quick access on the front of the machine to adjust blade stroke.

- Safety interlock on the blade access door

- Table size: 28-3/4” x 45”

- 2100 RPM

- Net / Gross weight: 1,285 lbs. / 1,458 lbs.

- Machine dimensions: (L) 32″ x (W) 45″ x (H) 56″

- Packing dimensions: (L) 36″ x (W) 51″ x (H) 61″

- (1) Toolbox and manual

- Warranty is one-year parts

- All machines are tested stateside prior to shipment providing trouble-free startup.

 

- **Main Motor Hp.** = 15 hp.

- **Voltage/ Freq.** = 460 Volt 60Hz

- **Phase** = 3 Phase

- **Amp Requirement** = 16 Amps

- **Electronics** = CE Approved Components

- **Dual Voltage** = 230/460 Volt

- **Control Voltage** = 24 Volt Control Voltage

- **Assisted Start** = Wye-Delta

- **Pass-Line** = 34”

- **Cut Envelope** = 2” x 21” 8” x 8”

- **Max. Width** = 2” x 21”

- **Max. Thickness** = 8”

- **Arbor Rpm** = 2100

- **Blade Size** = 24” Tungsten Carbide Tipped

- **No. of Teeth** = 120 Tooth

- **Tooth Spacing** = 5/8 In.

- **Blade Kerf** = 4 mm

- **Dust Collection** = (2) 4” @ 900 CFM

- **Dust Port Out** = 4” Top 4” Bottom

- **Arbor Diameter** = 1” Arbor

- **Cycles/Minute** = 40 Cuts Per Minute

- **Hold Down Style** = T Clamp

- **FLR Included** = Filter, Lubricator, Regulator

- **Emergency Stop** = Push Button

- **Safety Feature** = Safety Interlock Switch

- **Guarding** = Full Guard with Clear View

- **Operation Style** = Pneumatic Foot Pedal

- **Fence Type** = Adjustable Fence

- **Fence Dims.** = 2″ x 25”

- **Adjust. Stroke** = 7-3/4” Adj. on Arbor Stroke

- **Frame Const.** = 1/4” Steel Construction

- **Worktable Dims.** = 28-3/4” x 45”

- **Table Const.** = Cast Iron

- **Decible Rating** = 68 dB

- **Net Weight** = 1285 Lbs.

- **Gross Weight** = 1458 Lbs.

- **Machine Dims.** = 31-3/4” x 45” x 56”

- **Packaging Dims** = 36” x 51” x 61”

**OPTIONS:**

• 8’ infeed without fence and 8’ outfeed with fence, (2) legs, (1) gravity flip stop (UCS24-9-21A)

• 16’ infeed and 16’ outfeed with fence, (4) legs, (1) gravity flip stop (UCS24-9-21B)

• 8’ Special multiple stop outfeed fence (required for use of more than (1) flip stop (UCS24-9-22)

• Infeed horizontal clamp (UCS24-9-1)

• 24” x 120T carbide tipped blade (standard with saw) (UCS24-7-4A)

• 24” x 160T carbide tipped blade (UCS24-7-4B)

• (1) Gravity flip stop (UCS24-9-16A)

• (1) Rigid stop (UCS24-9-17)

• Two handed push button operation in place of foot pedal (UCS24-9-3)

• Illuminated safety guard for clear visibility of cut zone (UCS24-9-2)

• Voltage change

• LMC (Less Motor & Controls)

 

![](https://360degreemachinery.com/wp-content/uploads/2021/02/northtech-nt-ucs24-24-15hp-upcut-saw-right-or-left-230-460v-4-401x400.png)

![](https://360degreemachinery.com/wp-content/uploads/2021/02/northtech-nt-ucs24-24-15hp-upcut-saw-right-or-left-230-460v-3-390x400.png)

![](https://360degreemachinery.com/wp-content/uploads/2021/02/northtech-nt-ucs24-24-15hp-upcut-saw-right-or-left-230-460v-5-392x400.png)

![](https://360degreemachinery.com/wp-content/uploads/2021/02/northtech-nt-ucs24-24-15hp-upcut-saw-right-or-left-230-460v-388x400.png)

![](https://360degreemachinery.com/wp-content/uploads/2021/02/northtech-nt-ucs24-24-15hp-upcut-saw-right-or-left-230-460v-2-384x400.png)

![](https://360degreemachinery.com/wp-content/uploads/2021/02/northtech-nt-ucs24-24-15hp-upcut-saw-right-or-left-230-460v-6-800x276.png)