---
title: "Northtech NT 735LT 10 HP Spindle Shaper"
description: "The Northtech NT 735LT series single-phase spindle shaper has an impressive list of features and options. The standard machine gets a reversible 10 HP motor with belt-adjustable speeds of 3,000, 4,500, 6,000, and 10,000 RPM. The standard 1-1/4\" spindle with 6\" under the nut has 6\" of manually-adjusted vertical travel. Brake and spindle lock pedals, dust/safety hood, and micro-adjustable fences are also included.    Options include:     	Tilting Spindle / Sliding Table     	Tilting spindle assembly (-5 / + 45 Degrees)   	Sliding table with 8 rollers bearings       	15 HP Motor   	Voltage change to 460 volt   	M-10 digital LED readout of spindle height (installed)   	DP-727 digital electronic set works with power raise and lower plus has 99 position memory/recall    *Additional options available on the MK5 package:     	Optional 7” under nut spindle with spacers and nut   	Optional 3/4'', 1'', 1-1/4'', 40mm spindle with spacer nut"
url: https://360degreemachinery.com/product/northtech-nt-735lt-1034-10-hp-spindle-shaper-single-phase/
date: 2021-02-20
modified: 2025-03-26
author: "Dave Ratliff"
image: https://360degreemachinery.com/wp-content/uploads/2021/02/northtech-nt-735lt-10-hp-spindle-shaper-15.jpg
type: product
lang: en
---

# Northtech NT 735LT 10 HP Spindle Shaper

#### Features:

- (1) Toolbox

- Warranty is one-year parts

- All machines are tested stateside before shipment to ensure trouble-free start-up.

#### Specifications:

- Reverse Motor = Reversible

- Machine Hp. = 10 hp.

- Voltage/ Freq. = 230/460 Volt 60Hz

- Phase = 3 Phase

- Amp Requirement = 25/12.5 Amps

- Spindle Diam. = 1-1/4”

- Spindle RPM = 2875 – 9500 Rpm

- Under Nut Cap. = 6”

- Elevation Style = Manual Wheel Adjustment

- Elevation Sys. = Jack Screw / Quill Housing

- Electronics = UL Approved Components

- Dual Voltage = 230/460 Volt

- Control Voltage = 110 Volt

- Pass-Line = 35”

- Vertical Travel = 6”

- Dust Collection = (1) 5” @ 681 CFM

- Emergency Stop = (1) Push Putton (2) Bars

- Fence Type = Micro Adjustment Fence

- Fence Dims. = (2) 6” x 23-3/4”

- Micro Fence = Micro-Adjustable

- Tiltable = -5 / +45 Degrees

- Brake System = Foot Pedal Brake

- Frame Const. = 1/4” Steel Construction

- Worktable Dims. = 36” x 47-3/4”

- Table Const. = Cast Iron

- Infeed Table = 20”

- Outfeed Table = 20”

- Measure Meth. = PT28 Digital Readout

- Decible Rating = 73 Db

- Net Weight = 1770 Lbs

- Gross Weight = 1955 Lbs.

- Machine Dims. = 88” x 48” x 50”

- Packaging Dims = 91” x 55” x 53”