Flip book element

DETEL M-2H DOUBLE ROW 50 SPINDLE LINE BORING MACHINE W/NEW TOOLING

$3,800.00

This machines has very little and light use…….as is they were boring 4 total 1/16″ holes that was it……and the product never took off. So first off we replaced all 50 bits with 5mm brad points that are on 32mm centers. Overhead are 2 adjustable pneumatic hold downs. The back fence on this one is 79″ and has 3 flip stops. Adjustment of depth of bore one each head is scaled and is really easy to adjust. Each head is driven by it’s own 2HP 220V 3ph motor. Heads have a minimum of 5-1/2″ between centers and a max of 25″ from front to back of the machine with numeric read out and adjustment on the front of the machine. This fully functional machine has been fully cleaned, checked, and is ready to work from the time you receive it. This is our guarantee to both you and your company.

Read more

NORDFORD POLYTHERM 3000-5 VACUUM THERMOFORMER OVEN & PRESS

$22,500.00

These are hard to come by and this pair comes from a small custom shop that used them sparingly. Nordford designed these to run production work and they are heavily built. If you are looking at expanding capabilities and want the ultimate in flexibility, in house, look no further. Easily shape and bend solid surface/acrylic. Can you make a solid surface sink, bowl, shower base, or wrap a contoured countertop? With the Polytherm 3000-5 you can and you can also do so much more. With this pair of machines you can build what others can’t. Allowing you to turn cut offs and waste into treasure$$$ This Polytherm 3000-5 is comprised of 2 Units. The oven which has a 41″ X 152″ capacity and opens to 9-1/2″ of daylight and the vacuum press which has a 49″ X 165″ capacity. Vacuum is handled via a 2 hp vacuum pump. The oven heats up evenly and holds temperature accurately. While the press has a good silicone blanket that is still soft and pliable. The one main patch is for the seam while the other 2 are repairs. The patches look worse from the top. Once you look underneath you can see this is not an issue and you can also see how clean and wear free the vacuum bed is. This fully functional machine has been fully cleaned, checked, and is ready to work from the time you receive it. This is our guarantee to both you and your company.

  • Increased fabrication
  • Design innovation and flexibility
  • Multifunctional
  • Low maintenance
  • Easy to operate
  • Reduction in waste
  • Reduction in process time
  • Seamless finish
  • No dust extraction required
  • No special installation required
  • Lower operating costs
Read more

DOUCET 16 SECTION CLAMP CARRIER 102″ WIDTH

$12,000.00 $10,000.00

Clean Doucet clamp carrier. Each section has six 40″ capacity clamps for a total of 96 clamps. All are in very good condition. The width capacity is 102″. Although you could push 114″ if you had to. The over head board flattener has been rebuilt and has NEW seals. Rotation and the board tightener is handled via a 5 HP hydraulic pump. This fully functional machine has been fully cleaned, checked, and is ready to work from the time you receive it. This is our guarantee to both you and your company.

Read more

VESTIL UNI-4848-2 LIFT & TILT TABLE 2,000 LB CAPACITY

$1,500.00

This tilting Vestil lift & tilt has very little usage and is in excellent condition. It has a 2,000 lb capacity and can tilt to either 35 or 40 degrees. It only requires 230V/single phase power. This fully functional machine has been fully cleaned, checked, and is ready to work from the time you receive it. This is our guarantee to both you and your company!

 

Read more

DOUCET 8 SECTION CLAMP CARRIER 102″ WIDTH

$7,000.00

Clean, lower use, Doucet Model SRM-8-8.5-48-36 clamp carrier. Each section has six 36″ capacity clamps for a total of 48 clamps. All are in very good condition. The width capacity is 102″. Although you could push 112″ if you had to. The over head board flattener has been rebuilt and has NEW seals. Rotation is handled via a 5 HP hydraulic pump. A chuck is included for your impact. This fully functional machine has been fully cleaned, checked, and is ready to work from the time you receive it. This is our guarantee to both you and your company!

Read more

MEREEN JOHNSON 312-DC GANG RIP SAW

$22,000.00 $19,900.00

This MJ 312-DC’s hours meter is indicating 8,527 hours of run time. It has a 14″ blade capacity and a 12″ arbor capacity with a 3.5″ depth capacity. The arbor motor is 50 hp while the variable feed feed allows for speeds of 30 – 150 FPM. There are (2) sets of anti-kickback fingers on the infeed and (1) set on the outfeed side. Also included are 2 spare arbor sleeves, multiple spacers, and a set up stand. This fully functional machine has been fully cleaned, checked, and is ready to work from the time you receive it. This is our guarantee to both you and your company!

Read more

BLACK BROS 4 X 8 FEED THRU COLD PRESS

$13,000.00

This hard to find END loading Black Bros cold press features a 4′ X 8′ (50″ X 98″ actual) capacity with up to a current daylight opening of 36″. There is also room at the top of the threads for another 12″ if you need to get to 48″ of daylight. The top is comprised of 1 plate. The plates (top and bottom) are both flat and dent free. The press also features pop up rollers built into the bottom for ease of loading and unloading along with an 8′ outfeed roll. We did replumb most of the machine and replaced the regulators. Max. airbag pressure 100 PSI. This fully functional machine has been fully cleaned, checked, and is ready to work from the time you receive it. This is our guarantee to both you and your company!

Read more

EVANS 1050 T-EDGE MACHINE W/CORNER NOTCHING

$4,000.00 $3,500.00

This is one of those machines that is hard to find late model wise and when you need this type of machine it’s really one of your only choices. Evans 1050 T-edge machine features a 3” Electric Cutoff Blade for Corner Notching with a maximum cut of: 1-1/2” Wide and a minimum cut of 1/2” wide. The hammer motor is 1/2 HP with variable speed. Electrical: 120/240 V, 1 PH, 60 Hz Air Requirement: 100 PSI. This fully functional machine has been fully cleaned, checked, and is ready to work from the time you receive it. This is our guarantee to both you and your company!

Read more

Create a Flip Book for any product category. You can also select custom posts.