NORTHFIELD UNIPOINT 7.5HP RADIAL ARM SAW $2,500

NORTHFIELD UNIPOINT 7.5HP RADIAL ARM SAW $2,500

This Unipoint has a NEW set of motor bearings and runs smoothly. The carriage is tight and slides effortlessly. The 16″ blade is powered by a 7.5 hp main motor that is currently wired 230V/3 Phase and uses a knife switch to turn it on and off.  This particular machine is clearance priced to make room for new inventory. This fully functional machine has been fully cleaned, checked, and is ready to work from the time you receive it. This is our guarantee to both you and your company!

Motor Horsepower  7-1/2 hp
Saw Diameter 16″
Saw Hole 1″
Dado* Largest Width on Standard Mandrel 1-9/16″
Dado* Largest Width on 1-3/8″ Standard Mandrel 3″
Maximum Depth of Cut (16″ Saw) 4-1/2″
Cross Cut Capacity-Guide Fence Regular Position 17-1/2″
Cross Cut Capacity-Guide Fence Rear Position 25″
Ripping Capacity-Between Saw and Regular Guide Fence 23-1/2″
Ripping Capacity-with Guide Fence Moved to Rear 31″
Maximum 45 degree Miter, Guide Fence Regular Position 4″ x 12-1/2″
Moved to Rear 4″ x 14-1/2″
Maximum 70 degree Miter, Guide Fence Regular Position 4″ x 6″
Moved to Rear 4″ x 8-1/2″
Maximum Compound 45 degree Miter 3″ x 12-1/2″
Motor Raises to Center of Arbor to Table Top, Max 10″
Motor Lowers, Center of Arbor to Table Top, Min 3-5/8″
Size of Table 25″ x 48″
Height of Table 32″
Angle Capacity Saw Tilts to Left 45 degrees
Saw Pivot to Right 70 degrees
Saw Pivot to Left 45 degrees
Floor Space, Overall 48″ x 60″
Roller Tables, Length from Saw Blade to Each End 10′
Roller Tables, Width Overall 17-1/2″
Approx. Net Weight 800 lbs
Approx. Shipping Weight 1000 lbs
Approx. Shipping Weight, (Export) 1200 lbs