This Mikron was used sparingly in a small custom shop. Everything on it functions as it should. The feed rolls have no memory and are in excellent condition. The machine raises, lowers, and tilts as it should. Both the spindle and feed are smooth and quit running. Includes a full set of spacers, straight back-fence, rollers, and a 2-5/16″ wide cutter-head. This fully functional machine has been fully cleaned, checked, and is ready to work from the time you receive it. This is our guarantee to both you and your company!

The MIKRON M645 Multi-Moulder is a powerful machine that is designed to provide its owners with an extensive array of capabilities. The MIKRON M645 is a solidly built unit using a revolutionary approach to forming complex mouldings safely and accurately. Featuring a patented adjustable tilting-arbor head and floating tabletop, a variable speed feed motor and a precise tracking system, you can produce circles, ellipses, stair parts, curved crowns, bar rails and of course, straight mouldings up to 6″ wide, with the greatest of ease.


  • Manually tiltable spindle
  • Floating worktable
  • Variable speed feed motor — 0 to 30 feet per minute
  • Separately adjustable feed rollers to enable multiple passes
  • Axial adjustment
  • Mechanically adjustable fence for accurate, easy positioning
  • Linear tracking system guides the work piece smoothly and directly under the cutter head, while keeping it flat
  • Go from straight to curve in just one setup — no accessories required
  • Maximum cut is 6″ wide by 6-1/2″ thick
  • Uses a standard 4″ diameter, 2 knife corrugated back cutter head (1 included)


unit size: 34″ wide x 30″ deep x 65″ high (5′ min. front to back clearance needed)
worktable size: 38 wide x 24″ deep
weight: approx. 1400 lbs.
motor: 5 hp
arbor: 1-1/4″ diameter, 6″ long
spindle: 6000 rpm (reversible)
feed rate: 0 to 30 feet per minute (forward and reverse)
cutting circle: horizontal = 6-1/2″ max. | tilted = 6″ max.
thickness:  7″ max.