NEW OLIVER 22″ or 25″ PLANER W/BYRD HELICAL HEAD

NEW OLIVER 22″ or 25″ PLANER W/BYRD HELICAL HEAD

$$$CALL FOR THE MOST COMPETITIVE PRICING YOU WILL FIND$$$ We also carry Oliver’s full line! Contact us for a quote today on any machine they offer!

Choose between the following models:

4455.103B 22″ Planer W/ Byrd Shelix Cutterhead 7.5 HP 1 Phase

4455.104B 22″ Planer W/ Byrd Shelix Cutterhead 10 HP 3 Phase

4470.101B 25″ Planer W/ Byrd Shelix Cutterhead 10 HP 1 Phase

4470.102B 25″ Planer W/ Byrd Shelix Cutterhead 15 HP 3 Phase

4470 25” PLANER

The Oliver 4470 25” Planer puts other planers to shame. With two full feet of cutting width, over 9” of cutting capacity, and the ability to take up to 1/4” off in a single pass, this planer will take whatever you can dish out. The digital thickness controller and powered table travel eliminate guesswork, make dialing in settings a breeze. But ease of operation isn’t everything, this Oliver outputs stock that’s smooth and straight. A sectional infeed roller and chip breaker apply uniform pressure on uneven stock, coupled with two outfeed rollers to keep your stock in place. Add plenty of power under the hood, and you’ve got a planer that’s ready to tackle anything!

  • Available with three styles of a cutter head, straight, helical, or authentic BYRD.
  • Helical carbide inserts are indexed for quick changing.
  • Massive cast iron construction throughout allows up to a 1/4” cut.
  • Polished built-in table roller assists movement of rough stock.
  • Segmented infeed roller and sectional chip breaker easily handle rough stock.
  • Dual outfeed rollers assist with heavy stock.
  • 3-speed gear box provides the perfect feed rate.
  • Magnetic controls with emergency off switch for safer operation.
  • Control panel with digital readout allows precise thickness settings.
  • Power assisted table makes for quick, accurate, adjustments.
  • Hinged access to cutter head and feed rollers for quick set-up.
  • 5” dust chute easily handles chip removal.
  • Easy access to motor, drive train, and gearbox assist in maintenance and adjustment.
  • Powerful TEFC motor available in single or three-phase.
  • *Optional 440/460 volt available special order only. Additional cost/parts may apply.
    Model No.
    4470
    Stock No. (10HP, 1Ph, Straight)
    4470.001
    Stock No. (15HP, 3Ph, Straight)
    4470.002
    Stock No. (10HP, 1Ph, Helical)
    4470.1014S
    Stock No. (15HP, 3Ph, Helical)
    4470.1024S
    Stock No. (10HP, 1Ph, Byrd)
    4470.101B
    Stock No. (15HP, 3Ph, Byrd)
    4470.102B
    Maximum Stock Width
    25”
    Maximum Stock Thickness
    9-1/4”
    Minimum Stock Thickness
    1/8” Manual – 15/64″ Automatic
    Minimum Stock Length
    10”
    Dust Port Diameter
    5″
    Minimum CFM Required
    900 CFM
    Infeed Roller Diameter
    3”
    Steel Outfeed Roller Diameter
    3” (x2)
    Feed Speeds
    20, 25 and 30 FPM
    Bed Rollers
    2, Adjustable
    Table Size
    32” L x 26” W
    Footprint
    47-1/2” L x 21” W
    Cutterhead Diameter
    3-3/8”
    Number of Knives (straight)
    4
    Number of Knives (helical)
    174-4S (125-Byrd) (102-30mm)
    Cutterhead Speed
    4,800 RPM
    Table Support
    2-Column
    Motor (1Ph)
    10HP, 240V Only (43 AMPS)
    Motor (3Ph)
    15HP, 240V/440V, Prewired 220V (37 AMPS, 220V 3Ph) *Optional 440/460 volt available special order only. Additional cost/parts may apply.
    Overall Dimensions
    46” L x 23” W x 56” H
    Net Weight
    1,775 lbs
    Gross Weight
    1,837 lbs