WYSONG & MILES/CENTRAL MACHINERY 600 AND 601 DOVETAIL MACHINES $12,500

WYSONG & MILES/CENTRAL MACHINERY 600 AND 601 DOVETAIL MACHINES $12,500

Don’t let these pass you by as these are the cleanest Central Machinery 600 & 601’s that we have seen! Seriously look at the amazing condition these are in! Wysong built really robust and reliable dovetail machines back in the day. Fast forward a few decades and you will find this 600 & 601 that were rebuilt by Central Machinery (these are the ones you want) out of Lexington, North Carolina at some point. So what does rebuilt mean? It means they were brought up to spec and modern standards and are better than the original versions in many ways. You will find New bushings, bearings,  motors, controls, starters, fuses, control boxes……machines are totally re-wired with liquid tight conduit…….the air system is completely redone from piston seal and fitting to plumbing and air regulators/oilers………….even the oil strainers were replaced. These machines are fast, durable, and able to machine 2 parts at once. The “tail” machine (600) has only one fence because you stack you parts……face to face and in a matter of seconds you have a pair of tails. The “pin” machine (601) works a little differently in that you have a left and right fence. By placing a board both left and right you produce a pair of pins in a matter of seconds. These machines have 15 spindles on 1″ centers. Very simple and efficient. So if you can live with the limitation of 15 spindles……….or 15″ of width……on one inch centers dovetails will be a breeze! The only other downside is they tend to be loud. However within their limitations they are far far faster than CNC dovetail machines. Other features include built in oilers for the spindles, variable speed (cycle time), and Accurate Technologies Pro-Scale on the 600. These fully functional machines have been fully cleaned, checked, and are ready to work from the time you receive them. This is our guarantee to both you and your company!