US CONCEPTS CHA-8 HAUNCHER NOTCHER $6,000

US CONCEPTS CHA-8 HAUNCHER NOTCHER $6,000

This is a very hard to find machine that is in excellent condition. While extremely compact it offers a 5″ working height, 8″ width, and up to a 2″ depth of cut. Power is provided via a 10 hp motor where as torque is transferred to the spindle via a flat belt. One thing that really sets this particular hauncher/notcher apart is it’s air over hydraulic system. It allows the table to glide effortlessly and extremely smooth up and down dampened by fluid. The differences in the quality of the stroke vs air only are is enormous. As you achieve a motion that produces a much higher PSI yet is very dampened and controlled. The difference can be seen in the actual quality of cut.

Currently this machine comes with a 5″ head and was being used for beaded face frame haunching. The machine however offers a lot of versatility and can be used for box joints, finger-joints or tenon cuts, shaping the edges of square ballisters or dentil moulding, notching the edge of the panel, or shaping the end of the moulding such as window aprons and so much more.

  • Horizontal spindle moves up-down passed the material clamped to the table
  • Climb cut and table insert ensure a clean cut even when cross grain cutting
  • Air / Oil adjustable feed system
  • Air clamps
  • Automatic cycle
  • Max. Work piece height – 5″
  • Max. Cutting depth – 2 “
  • Max. Cutting width – 8”
  • Cutter diameter – 8″
  • Motor –  10HP
Table size
28” x 12”
Working height, Max.
5”
Cutting depth, Max.
2”
Tool clamping width, Max.
8”
Spindle diameter
40mm
Spindle speed
6500RPM
Cutter diameter
8”
Feed rates
0-21 FPM
Pressure
90 PSI
Outer diameter of Pneumatic installation
1/2”
Air required for 8 strokes per minute
3.5 CFM
Motor
10 HP
Weight
940 lbs.
Machine dimensions
36” x 32” x 55”
Dust collection outlet
6”