WORKRITE MODEL 3000 WOOD WELDER $1,800

WORKRITE MODEL 3000 WOOD WELDER $1,800

Clean, fully operational WorkRite Model 3000 Wood Welder. With it’s 13 foot coaxial cable and handgun it is able to penetrate wood up to 1-1/2″ in thickness. It requires only 115V power which makes it portable as well. This fully functional machine has been fully cleaned, checked, and is ready to work from the time you receive it. This is our guarantee to both you and your company!

13 FOOT COAXIAL CABLE
STANDARD HAND UNIT
MAXIMUM VOLTAGE 115 VAC
MAXIMUM CURRENT 15 AMPS
FREQUENCY 27.12 M.C.
RADIO FREQUENCY

PENETRATES 1 ½ INCHES OF WOOD

MODEL 3000 SHIPPING WEIGHT 150 LBS.

RFS 36″ x 48″ FEED THRU RADIO FREQUENCY GLUER W/NEW TUBE $13,000

RFS 36″ x 48″ FEED THRU RADIO FREQUENCY GLUER W/NEW TUBE $13,000

This machine has a lot going for it and is very hard to duplicate. First of all it comes with a lay up table. In addition it is a feed thru model. This means not only ease of gluing up your panel, but you can also be laying up a panel while the machine is cycling! On top of this the machine comes with a brand NEW tube with a 1 year warranty. Not to be confused with a refurbished tube. It also has relatively low usage with 9,338 metered hours. Did we mention that this machine is also 230V/3 Phase? If this hasn’t gotten your attention how about the fact that if you were to insert 12 three inch wide boards that are 48″ in length and 3/4″ in thickness your cycle time would be under 1-1/2 minutes! The 3 kW generator cures approximately 300 sq. inches of glue line per minute. It features a 36″ X 48″ curing area (39″ X 51″ clamping area) with a max thickness capacity of 2″.  See below for full specs. This fully functional machine has been fully cleaned, checked, and is ready to work from the time you receive it. This is our guarantee to both you and your company!

  • 36″ x 48″ curing area
  • 39″ x 51″ clamping capacity
  • 2″ maximum thickness capacity
  • 3 kW generator (cures approximately 300 sq. inches of glue line per minute)
  • Side pressure by (7) 4″ bore x 4″ stroke air cylinders
  • Top pressure by (2) 5″ bore x 12″ stroke air cylinders
  • Two-hand no-tie-down safety controls for closing the top platen
  • Layup table included
  • Electrical requirements: 50 amps @ 230 Volt 3-Phase

ROSENQUIST EB750H45 FEED THRU RADIO FREQUENCY PRESS $24,000

ROSENQUIST EB750H45 FEED THRU RADIO FREQUENCY PRESS $24,000

This is a really nice size feed thru press featuring a plate area of 54″ x 90″ and a pressing area of 58-1/2″ X 96″. Ideal for 2 step process for 15’0″ product. Max thickness capacity is 4-1/2″. It is powered by a 20 KW RF Generator while pressing is handled by a 10 HP hydraulic pump. There are a total of 20 cylinders. 15 for edge pressure and 5 providing top pressure. All 20 cylinders have been rebuilt. The 98″ in-feed table features a hydraulic feed and there is also a matching  98″out-feed table to maximize loading and unloading. This fully functional machine has been fully cleaned, checked, and is ready to work from the time you receive it. This is our guarantee to both you and your company!

RFS 20KW RADIO FREQUENCY GLUER $12,500

RFS 20KW RADIO FREQUENCY GLUER $12,500

Single owner shuttle style machine. 20 KW radio frequency generator with an 80″ X 36″ X 4″ capacity. Material is clamped from 3 sides via 4 top, 3 edge, and 9 side hydraulic pushers.  Built in timer and adjustable RF. A very nice clean and complete machine with a large 20KW generator.