TAYLOR 40 SECTION CLAMP CARRIER $9,500

TAYLOR 40 SECTION CLAMP CARRIER $9,500

This is a pretty straight forward machine. 40 section 8′ wide clamp carrier. 182 clamps with a 32″ capacity. (plus 8 parts clamps). The machine also has 38 thin material hold down bars.  Pneumatic board flatener. Pneumatic clamp tightening. Pneumatic rotation.

RFS PROTECH MODEL PT-7 RADIUS FORMING CLAMP $12,000

RFS PROTECH MODEL PT-7 RADIUS FORMING CLAMP 

This fully functional PT-7 has been fully cleaned, checked, and is ready to work from the time you receive it. Any residual glue has been removed and all parts have been thoroughly cleaned and buffed. The machine has been completely re-plumbed and there is not a single air leak. Includes two 8′ heat bands, two 12′ heat bands, four 76″ long metal bands, 31 specialized arch clamps, one end clamp, and 2 end stops. The actual work easel/area measures 54″ X 122.

The PT series of Radial Forming Machines was developed as an economical alternative method to easily and accurately fabricate curved components such as arched headers and radiused moldings for windows, doors, furniture parts, etc. These machines are designed to fit the needs of small and large companies. The PT Radial Forming machines can produce a wide range of shapes without the use of forms or templates. The patented, ruggedly built machines feature welded steel frame construction and quality components for a long and productive life. The machine can be used as a cold press or with the supplied heat bands.

The PT-7 Radius Former uses a series of machined rails supporting dual sets of heavy aluminum arms, which are adjusted to define the pattern to be fabricated. 31 specially designed Air cylinders, which use pneumatic air pressure up to 120 psi and are connected to the clamp via quick disconnect. The PT-7 can be used as a cold press or equipped with a set of thermostatically controlled heat bands. Depending on the size of the component and adhesive used, the heat bands can cure the assembly in as little as 20 minutes.

TAYLOR 8 SECTION LARGE CAPACITY ROTARY DOOR CLAMP $15,000

TAYLOR 8 SECTION LARGE CAPACITY ROTARY DOOR CLAMP $15,000

This is a very hard to find 8 section rotary clamp. It has a generous 42″ X 86″ of clamping space per section. It was also ordered with 3 horizontal clamps and 4 vertical clamps for a total of 7 clamps per section. (56 total clamps) This machine is fully pneumatic and can produce 400+ doors a day. This fully functional machine has been fully cleaned, checked, and is ready to work from the time you receive it.

Note: Please note this is a rust free machine. The brownish color you see if from glue reacting with the metal. While we have the ability to sandblast in house we NEVER sand/media blast this type of clamp as the metal then becomes porous and harder to clean in the future. 

LARGE CAPACITY RAMARCH PNR9 4 SIDED ROTATING CLAMP SOLD

RAMARCH PNR9 4 SIDED ROTATING CLAMP $$$RECENTLY SOLD$$$

A very rare find in North America…….because these are pretty pricey new! Luckily this one is pre-owned and in very good condition. Not to mention the fact that it comes with 39 clamps. Basically each side/face has 3 sides with squaring channel that is 3-7/8″ deep. The capacity between this channel is 137″ wide X 56″ tall. You can use this space to clamp one large work-piece and consider this a “4 zone clamp” OR you can split the 137″ to whatever dimension you want and create up to “8 zones.” You can do this because on each side you have 2 pairs of pneumatic controls. Meaning one pair per side for the vertical clamps and one pair for the horizontal clamps. Meaning 4 total pairs per side for a total of 16 controls so you can have flexibility in how you set up the clamp. They are also separated out in pairs to the left and right of the clamp. Further more the carousel is spun via a hydraulic brake motor which allows you to stop the carousel at any angle for operator comfort. This fully functional machine has been fully cleaned, checked, and is ready to work from the time you receive it.

JLT CABINET DOOR & FRAME CLAMP $3,800

JLT CABINET DOOR & FRAME CLAMP $3,800

This cabinet door and frame clamp has been fully cleaned and checked. This means that it has a good regulator, no air leaks, the easel raises and lowers as it should, forward reverse switch works as it should,  and that the machine is clean and glue free. Description: Inclined style clamp with 2-way pneumatic pressure (top and side) 51″ x 76″ clamping capacity. Vertical power up/down via single phase 115V motor and ball screw.  Horizontal clamping via 2 pneumatic cylinders and foot pedal actuated. model 78B-CDFC-M7