CELASCHI PROGRESS 36A SINGLE END PROFILER OR TENONER $7,500

CELASCHI PROGRESS 36A SINGLE END PROFILER OR TENONER $8,000

This machine is very clean, amazingly complete, well optioned/loaded, and the hour meter only shows 9326 run hours. It features Four 7.5 kW (10 hp) spindles with 50 mm x 420 mm spindles with vertical & horizontal motorized positioning and 1,000 memory presets. All four spindles feature forward and reverse and the 420mm or 16-17/32″ long spindle will allow for stacked tooling. In addition to these features heads 1 & 3 are jumps! Dual chain tracks one inboard fixed 4-1/2″W with pop-up dogs every 16″ and one outside w/motorized adjustment, 3″ wide with pop-up dogs every 16″. Motorized fence with electronic digital read-out for sizing of product. Also included is a full Oertli tooling package consisting of 29 heads  (pictures of profiles provided in gallery at bottom of this page) and a plethora of inserts. Full sound enclosure, separate control cabinet w/operator panel, foot pedal, hand control pendent, hand set up read out, manuals, and schematic included. (note this is a clearance item and priced accordingly)

UNIQUE 4512 SHAPE AND SAND SOLD

UNIQUE 4512 SHAPE AND SAND $$$RECENTLY SOLD$$$

This particular machine was used very sparingly and is extremely clean. Machine features  (3) Stations total (w/jump cope)– (1) floating shaper and (2) floating sanders each with 5″ stack capacity. Shaper station is a 10 HP direct drive motor with 1-1/4″ diameter arbors. Shaper station has variable speed from 6,000 to 9,000 RPM and is reversible. (2) Sanding stations are 2 HP direct drive Baldor motors with 1″ diameter arbors. Sanding stations are variable speed from 6,000 to 9,000 RPM and reversible.  Variable speed conveyor speed from 0 to 35 FPM. 6″ heavy duty conveyor and roller hold-down system. Sanding stations tilt 45° and have air jets. Maximum material thickness – 2-1/2″; minimum material width – 1-1/2″ plus the depth of the cut. (1) 5″ Diameter dust port and (2) 4″ diameter dust ports

CLARY 42″ DOOR ASSEMBLY CLAMP $900

CLARY 42″ DOOR ASSEMBLY CLAMP $900

Designed to hold component parts of exterior or interior door units in position to facilitate faster, easier, and more accurate assembly. Handles doors up to 7’0″ in height and up to 42″ in width. There are 2 pusher bars, one pushes forward and one backward. Total travel is 42″. In other words you can also clamp two 21″ doors, or a 30″ and a 12″, or two 18″ with room to spare.