SCMI MINIMAX FORMULA ME 30 EDGEBANDER $9,000

SCMI MINIMAX FORMULA ME 30 EDGEBANDER $9,000

Another clean small shop, Mom and Pop only run machine (literally)! This is an automatic edgebander with a glue pot to edgeband, with great flexibility, melamine edges, PVC and ABS up to 3 mm, and wooden strips up to 5 mm. This fully functional machine has been fully cleaned, checked, and is ready to work from the time you receive it. This is our guarantee to both you and your company!

Specifications:

  • On-Step adjustment for panel thickness with digital indicator
  • Feed track slides on two round guides for entire length, assuring a straight cut and resistance against side pressure load
  • Automatic Feeder for rolled edges and shear device for cutting thicknesses up to 3mm
  • Guide for feeding wood and laminate strips
  • Glue Pot is Teflon coated to facilitate easy glue change and cleaning
  • Automatic Thermostat on glue spreader
  • Device for automatic recovery of unused glue
  • Horizontal pressure unit with two rollers of which the first is power driven, both are equipped with mechanical pressure adjustments
  • High-frequency front and end cutting saw blade
  • Quick change trimming units with high frequency motors
  • Shaper cutters with replaceable insert tooling
  • Scraping unit
  • Buffing Unit
  • Telescopic support bar with rollers
  • Safety sound hood
  • Centralized dust collection
  • Panel thickness range 0.3-1.5″
  • Banding Thickness PVC/Wood 3mm/5mm
  • Min. Working Width 2.37″
  • Min. Working Length 5.5″
  • End cutting motors 0.3 HP @ 12,000 RPM
  • Edge trimming motors 0.4 HP @ 12,000 RPM
  • Edge trimmer cutting angle 12 degrees
  • Conveyor motor 0.8 HP
  • End cutting blade diameter 100 mm
  • Weight 1,249 LBS

 

2013 HOLZ-HER ARCUS 1334 (SERVO) EDGEBANDER W/2,600 HOURS $39,500

2013 HOLZ-HER ARCUS 1334 (SERVO) EDGEBANDER W/2,600 HOURS $39,500

Clean loaded Holz-her 1334 with all the options like pre-mill and 4 motor corner rounding. Machine currently has a little over 2,600 run hours on it. Very clean hard to find, low hour machine that easily powers thru edge-banding like 3 mil and strips. This machine also has hoppers for cartridge and granules. The GlueJet technology will allow for the use of not only granules and cartridges, but GlueJet PUR as well. With no glue pot, color change overs are fast, simple, clean, and waste little glue. 15″  EdgeController Screen. 1802 Pre-Milling Servo Infeed Fence,  1901 Edge Feed Snychro, Automatic Feed Magazine GJ301 Automatic GluJet Pressure Section, 1914 Pressure Unit Pneumatic Driver (servo), 1925 End Trim Unit Top/Bottom Trim (2 servos), 1828 Top and Bottom Cutter, 1833 Profile Cutter Corner Rounding Unit (4 servos), 1927 HD Profile Scraper (1 servo – in/out), 1964 Finish Scraper, 1944 Top and Bottom buffing unit. A full set of manuals also accompanies this machine. This fully functional machine has been fully cleaned, checked, and is ready to work from the time you receive it. This is our guarantee to both you and your company! This machine is stored in our warehouse. Give us a call to schedule a demo!

***Stations read the following from left to right on the Edgecontroller GJ301, Beam, Feed-V, 1802, 1901, 1901, 1914, 1925, 1925, 1828, 1833, 1927, 1964, 1944 (duplicates mean that you have multiple options for that given station) Machine replacement cost $150,000

FLETCHER FM-2001 TOP AND BOTTOM TRIMMER $4,000

FLETCHER FM-2001 TOP AND BOTTOM TRIMMER $4,000

These are made by Fletcher and were also sold under the Delmac brand for well over a decade. Very well built and this machine can handle 3 mm material! Over head control panel for easy operator access, Non-marring phenolic top, heavy fabricated steel base, polished chrome copy shoes w/ fine adjustment screw for accurate and uniform trimming, trimming motors mounted on linear bearings, upper trimming unit adjusts for 1/2″ to 2-1/4″ thick panels, spring loading for constant pressure, top and bottom 0.7 HP motors that are adjustable from 0-12,000 RPM with inverter drive. Pneumatic cylinder w/foot pedal control for rasing and lowering of upper trim unit. This fully functional machine has been fully cleaned and checked and is ready to work from the time you receive it. Currently wired 230V/3 Phase

 

 

 

 

DELMAC DMG 62CT or FRAVOL AZ/2 TOP & BOTTOM TRIMMER $3,000

DELMAC DMG 62CT or FRAVOL AZ/2 TOP & BOTTOM TRIMMER $3,000

This is a low use Italian made Fravol AZ/2 top and bottom trimmer distributed by Delmac in North America as a DMG 62CT. Mechanically it is in excellent plus condition. It’s only downfall is that it has scratches on the case as the previous owner moved it around when he needed it. It has dual .7hp motors on floating heads and is capable of trimming up to 3mm material. The motors are high speed spindles running up to 12,000 rpm and are run on single phase 220V power. Heads are foot pedal activated. SPECS: Shaft diameter-16mm, Shaft height-50mm, Mininmum inside trimming radius-20mm (3/4″), Panel thickness min/max 5/8″- 2 1/4″, Table top size-25 1/2″- 39 1/2″.