MIKRON AUTOMATIC ROSETTE MACHINE

MIKRON AUTOMATIC ROSETTE MACHINE  $3,000

Fully operational, hopper fed, automatic rosette machine capable of making up to 500 rosettes an hour. It comes with the head, but does not have any inserts. It is powered by a 3hp Baldor 208-230/460V motor that is currently wired 230V.  This fully functional machine has been fully cleaned, checked, and is ready to work from the time you receive it. (minus tooling)

JETRIX 2030 FRK UV FLATBED PRINTER

2013 JETRIX 2030 FRK UV FLATBED PRINTER W/ ROLL FEED, WHITE, PRIMER, LIGHT CYAN & MAGENTA $30,000

This low use, well maintained, 2030 FRK was manufactured in 2013 (aprox. $130,000 replacement cost) and also features a 64″ roll to roll feed giving this printer a huge variety of applications. It has an 80-3/4″ X 120-1/2″ over sized vacuum bed (w/3 zones and 3 vacuum pumps) and features 8 colors. Cyan, Magenta, Yellow, Black, White, Primer, Light Cyan, & Light Magenta. The Primer gives the capability to print onto almost any substrate, such as Glass and Stainless Steel. The 2030 FRK also features a PC controller that is very user friendly! Point and click literally! It is running version Jetrix V2.5/2030 operating software. Machine is currently under power and being cycled multiple times weekly. The Jetrix 2030FRK UV Flatbed one of the fastest flatbed printers in the Jetrix range giving a production speed of 55sqm per hour. Producing stunning graphics at amazing speeds. The incredibly functional and easy to use unique Jetrix operating system powers the Konica Minolta heads accurately allowing printing text down to 2pts. This is combined with InkTec’s world-class tailor made UV ink which is vibrant, durable, long-lasting and economical. Machine is currently under power and being cycled multiple times weekly.

  • 14 Picoliter: 1024 nozzles
  • True flatbed capability capability: Print heavy, non-square objects
  • Roll printing system up to 1.6 metres: Vinyl, mesh, textiles, paper, canvas, etc
  • Anti-head crash system: Safety & no loss of printing job.
  • Intelligent vacuum table system
  • White, varnish, Primer: Total printing solution supplies
  • Size: Stationary flatbed: 2050 x 3060mm, Roll: 1620mm
  • Speed: 55 sqm/hr (production mode)
  • Colours: CMYK, LC, LM & White, PLUS Primer option
  • USES Konica KM1024 MHB Print Heads
  • USES Inktec inks *widely available

WEGOMA MPA-2 CORNER CLEANER

WEGOMA MPA-2 CORNER CLEANER $3,000

Dual head corner cleaner in good operating condition. We replaced and/or rebuilt 5 air cylinders in total to guarantee it is in good operating condition. Currently wired 230V/3 Phase. 2 sets of tooling included. In above average condition considering other MPA-2’s out there.

KARL ENGELHART TWF 1000 STAIR TRENCHER AND MULTI BORING MACHINE

KARL ENGELHART TWF 1000 $2,500

A rare machine in North America mostly due to cost. At over $30,000 NEW it’s not hard to see why so few made it to this part of the world. Like most German made machines this one is well thought out,  accurate and precise. This well cared for machine’s motion is effertless and flawless. With nearly 62″ of x-axis travel, 48″ between rails from front spindle, 54″ from the back,  3 1/2″ of y-axis travel, and 3 1/8″ of z-axis travel this machine can do things few boring machines can. It also has the ability to bore open ended at the end of the machine. The clamping rails have rubber inserts across the top so that your work piece does not get damaged. The clamping capacity is a generous 4 1/2″ and fully adjustable. Power is provided by a 220V/3 phase 4 hp motor that has 2 speeds plus forward and reverse. Twin spindles turn counter clockwise one another and are flat belt driven. With a built in halogen work light, squaring fence, and built in castors it’s not hard to see the German engeering. Use it to trench stairs, cut slots, dados, bore holes…..lot’s of possibilities…..